HP Smart Array Cluster Storage System

Cluster Installation and Configuration
5-26 HP Smart Array Cluster Storage System User Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Cluster Installation and Configuration
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/6/02 1:05 PM
Preparing for Operating System Installation
Before installing the operating system, gather the following information:
• Server A
— Name
— Administrator password (used during operating system installation)
— Public network connection IP address and subnet mask
— Private network connection (cluster heartbeat) IP address and subnet mask
• Server B
— Name
— Administrator password (used during operating system installation)
— Public network connection IP address and subnet mask
— Private network connection (cluster heartbeat) IP address and subnet mask
• Cluster IP address and subnet mask
• Default Gateway Address (if applicable)
• WINS Server Address (if applicable)
• DNS settings (if applicable)
Configuring the Nodes
To configure the nodes:
1. Power up the storage system and wait for the controllers to initialize.
CAUTION: Always power up the Smart Array Cluster Storage system before
powering up the servers. It may take up to 2 minutes for the system to
completely power up. Wait until the display provides the “Startup Complete”
message.