HP Smart Array Cluster Storage System

Cluster Installation and Configuration
HP Smart Array Cluster Storage System User Guide 5-23
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Cluster Installation and Configuration
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/6/02 1:05 PM
2. From the root of the CD, execute nwdeploy.exe:
a. Open the Post-Installation Tasks folder in the NetWare Deployment
Manager and select Install or Upgrade a Novell Cluster.
b. Continue to follow the installation screens, then select Create a New
Cluster.
3. Enter the name of the server to add to the cluster, or browse and select one from
the list, and then select Add to Cluster. Repeat this step for every server you
want to add to the cluster. Then click Next.
NOTE: When you add a server to a cluster, NCS automatically detects the server IP
address. If the server you are adding has more than one IP address, select the IP address
you want NCS to use.
4. Enter a unique IP address for the cluster.
5. Continue through to the final installation screen.
Creating Novell Storage Services (NSS) Volumes and Pools
To create an NSS volumes and pools:
1. Log in to ConsoleOne from one of the nodes and authenticate to the appropriate
tree.
2. Scroll down and highlight the cluster created earlier.
3. Select the Device Disk Management icon at the top of the screen.
4. Highlight a shared drive. Be sure that it is not the drive containing DOS or SYS.
5. Click the Media tab and select NSS logical volumes.
6. Select New and enter new logical volume name. Select Next.
7. Highlight the first external shared drive.
8. Check the Allow volume quota to grow box. Click Next.
9. Enter a Pool Name and select OK.
10. Assign a Virtual IP Address for the NSS volume. Click OK.