hp media center pc hardware user’s guide i
The information in this document is subject to change without notice. Hewlett-Packard Company® makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Safety Information Before you get started, please read this important safety information about your HP Media Center PC. This product has not been evaluated for connection to an “IT” power system (an AC distribution system with no direct connection to earth, according to IEC 60950). w AC Power Safety Warnings The power supply is preset for the country/region in which you purchased the PC.
Safety and Comfort Follow the steps in the setup poster to set up the computer. After assembling but before using the computer, make sure the computer and your work area are properly set up to maintain your comfort and productivity. Refer to Working in Comfort in the Help and Support Center for important ergonomic information. Just click Start, Help and Support, My HP Pavilion PC, and then click Working in Comfort. You can find important ergonomic information on the Internet. Just type http://www.hp.
Help and Support HP provides many kinds of information and help for your PC. ■ HP Utility programs in the hp pavilion pc tools folder. ■ The Help and Support Center is an onscreen Help area where you can find information from HP and Microsoft about using the PC and its components. Go to the Help and Support Center when you want to read about your computer, view tutorials, run tests, or get troubleshooting help by using the Internet.
HP Web Site and HP Support 1 Connect to the Internet: Open your Web browser, or press Connect on your keyboard. 2 Type http://www.hp.com into your Web browser address box and press Enter on your keyboard. 3 Select your country/region from the drop-down list, and click the arrow to the right of the list (scroll down to see the box). 4 Click the support link. HP Customer Care You can get help over the telephone from HP.
Table of Contents Welcome .................................. 1 How to Use This Guide .............. 2 Where Can I Find Information? ............................. 3 Inventory .................................. 4 PC and Main Components .......................... 4 Media Center Components ......................... 4 2.1 Speaker System Components ................ 4 Setting Up My PC ...................... 5 Checklist ................................................... 5 Front of PC .............................
viii
Thank you for purchasing the HP Media Center PC. HP has combined the features of the HP Pavilion home PC with the Microsoft® Windows® XP Media Center Edition operating system to create a powerful entertainment center for you. This PC includes an impressive sound system, a DVD+RW/+R player, a 6-In-1 memory card reader, and powerful 3-D graphics capability. It is simple and easy to use. It allows you to assemble your music, videos, and pictures, and to enjoy them with a click of the remote control.
How to Use This Guide n A note describes important information you need. This guide will help you get started using your new PC right away. 1 Read “Safety Information” at the beginning of this book. 2 Identify the items included with your computer. Refer to information shown in “Inventory.” 3 Follow the setup poster to connect your computer. w A warning describes information you need to avoid possible personal injury or damage to equipment or data. Read and follow all warnings.
HP provides you with printed documentation, onscreen information, troubleshooting help and tests you can run from HP Instant Support, and help over the telephone from HP Support. Here is where to find information: Setup poster, in the computer box, shows how to connect your computer. For additional information and setup alternatives, refer to “Setting Up My PC.” Help and Support is onscreen Help. Press Help (the ? button) on the keyboard, or click Start on the taskbar, and then click Help and Support.
Inventory PC and Main Components PC Media Center Components Remote control 2-AA batteries for remote control 2.1 Speaker System Components (not included with all models) 2.1 Subwoofer (power cord attached) Power cord 10' Coaxial cable Documentation packet of books and CDs Mouse 2.1 Speakers Remote sensor S-video to composite video adapter Modem cable Composite video cable Keyboard Remote sensor control cable 4 2.1 Speaker cables n For 5.
Setting Up My PC Follow the steps in the setup poster to set up the computer. Connect the keyboard, mouse, speaker system, and remote sensor to the connections on the back of the PC. Match the colors. Setting Up Your connector locations and system components may vary. The following pages identify the location of components and connectors on your PC and provide some setup alternatives. Checklist The following items are not provided with your PC.
Front of PC dvd 1st Optical (CD or DVD+RW/+R) drive Eject button cd writer plus 2nd Optical (CD or DVD+RW/+R) drive Eject button dvd writer TV GUIDE MUSIC PICTURES VIDEOS Mode buttons SmartMedia MultiMediaCard/SD CompactFlash I/II Memory Stick 6-In-1 memory card reader Diskette (floppy) drive Eject button On button with power indicator light Hard disk activity indicator light 6 Front ports: IEEE 1394 (6-pin) USB 2.
Back of PC n Power cord connector Setting Up Location and number of connectors may vary by model. Power LED Voltage selector PS/2 Mouse PS/2 Keyboard Line out-2 Serial port Parallel port USB 2.
Connecting the Monitor Connecting the Printer or Scanner Connect your monitor to the PC. The monitor is not included with the PC. Refer to the documentation that came with your monitor. Connect peripheral devices to the PC one at a time. The printer or scanner is not included with the PC. Refer to the documentation that came with your device.
Connecting to the Internet Through a Modem/Telephone Connection n Connect the telephone line to the modem, which is inside the computer. 1 Plug the modem cable (provided in the computer box) into the computer modem connector and to your telephone line wall jack connector. 2 Optionally, you can plug a telephone cable into the computer telephone connector and into a telephone. (Telephone and cable are not provided.
Connecting the Remote Sensor The remote sensor is a small device that connects to the PC and allows the remote control to work with the Media Center program. Remote Sensor Connect remote control receiver to computer If you have a cable TV set-top box, satellite, or other set-top box that controls your TV signal, connect the remote sensor control cable to the remote sensor and position the end of it over the remote receiver on your cable box.
Connecting the Signal Source This section describes connecting the signal source for TV. ■ Plug the connector of a coaxial cable from your TV antenna or from your TV cable (wall or set-top box) into the TV connector on the back of the PC, and then turn the connector to tighten it. Or ■ Plug a cable into the S-VID IN connector on the back of the PC: use an s-video cable (not provided) or use the s-video to composite video adapter cable and the composite video cable.
Optional Connections Connecting the TV is optional and not required to enjoy Media Center. Using the TV Cables Your PC comes with the following cables for the TV signal: Coaxial cable S-video to composite video adapter Composite video cable ■ One coaxial cable (10 feet). Use a coaxial cable for a BNC connector, such as the TV source signal. ■ One s-video to composite video adapter cable (2 inches). Connect this adapter to an s-video connector, and then attach a composite video cable to the adapter.
Connecting the TV Composite video (TV out) TV OUT (s-video) VGA Monitor 1 Plug a cable into the TV OUT s-video connector or the COMP composite video connector an the back of the PC. Choose the cable type your TV needs. 2 Plug the other end of the cable into the TV IN connector on your TV. 3 Turn on the TV and select the TV IN video source; refer to the documentation for your TV set. Connections 4 Be sure to enable the image for the TV; see “Enabling TV Out Image.
Connecting the TV Signal Source When You Have an Existing Setup This section describes how to connect the PC to an existing setup for your TV signal source. Existing setup Add the PC with a splitter Wall Wall Cable Cable Wall to VCR to TV using coaxial cable Remove the coaxial cable at the input to the VCR, and connect it to the input of a coaxial cable signal splitter (not included; available at electronics stores). Connect two coaxial cables to the splitter outputs.
Wall to Cable TV Set-top Box or Satellite Box to VCR to TV Using Coaxial Cable Remove the coaxial cable at the input to the VCR, and connect it to the input of a coaxial cable signal splitter (not included; available at electronics stores). Connect two coaxial cables to the splitter outputs. Connect one of these cables to the input of the VCR and the other one to the TV connector on the back of the PC. Be sure to connect the remote sensor control cable and position it on your set-top box or satellite box.
Wall to Cable TV Set-top Box or Satellite Box to VCR and TV Using S-video Cable or Composite Video Cable Between the Box and the VCR or TV 1 Do not detach any cables from your existing setup. 2 Connect an additional cable: Using s-video cable (not included): connect an additional s-video cable to a second output on the set-top box or satellite box. Plug the other end of the cable into the S-VID IN connector on the back of the PC.
Connecting Your Speakers Speaker systems are not included in all PC models. Always turn on the PC before you turn on the speaker system. The 2.1 speaker system and the 5.1 speaker system are powered by the sound card that has a suite of software applications from Creative. Creative PlayCenter 3 is an integrated player for multiple media formats you can use to create various audio formats. Sound Blaster Audigy allows you to set up and audition various audio devices.
2.1 Speaker System 1 Put the rubber feet on the bottom of the speakers. 2 Place the two speakers on the left and right of your monitor or TV. 3 Place the subwoofer on the floor beneath your computer desk or TV. Do not block the side or front of the subwoofer, and allow for ventilation to reach the rear of the subwoofer. Do not place the subwoofer by the computer monitor; to avoid interference, place the subwoofer 10 inches or more away from the monitor. 4 Refer to the setup poster for connecting the 2.
5.1 Speaker System Because your 5.1 speaker system may vary, to set up your speakers, please refer to the instruction package included with the 5.1 speaker system box. To connect the 5.1 speaker system, refer to the table listing connector information. 5.
Adjusting the Volume Microphone Adjust the volume for the speaker sound level any of these ways: Your PC comes with a microphone connector on the back of the PC. ■ Turn the Volume knob on the keyboard. Using the microphone ■ Double-click the Volume icon on the taskbar, and then adjust the volume. The microphone connector is pink and is labeled with a microphone icon. It is already set up to work as soon as you plug in your microphone.
Starting the PC for the First Time After you’ve completed connecting the components of your PC by using the setup poster steps, you are ready to turn on the computer. 1 Press the Power button on the monitor. 2 Press the On button on the front of the PC. 3 Follow the onscreen instructions for the initial Microsoft Windows setup. 4 When you see the Register with HP screen, enter your n Read “Safety Information” at the beginning of this book before you turn on the computer.
Selecting an ISP As part of the startup screens, you can select an Internet Service Provider (ISP). Before you can connect to the Internet, you need to sign up with an ISP. You need an Internet connection to use some of the Media Center features. Easy Internet Sign-up helps you sign up for a new Internet account, set up an existing account, or configure Internet access using a LAN (local area network), cable modem, or DSL (digital subscriber line).
Starting PC HP Desktop The HP desktop has shortcut icons that make it easy to find the things you need. Click the icon to find out more information about its program. Help and Support Media Center The screen on your computer may not match the screen pictured here. Click the Start button to open the Start menu. Use this menu to: ■ Open Media Center by clicking Start on the taskbar, All Programs, Accessories, Media Center, and then click Media Center again. ■ Select programs or documents.
Enabling TV Out Image You must enable the TV out image in order to view Media Center using your TV. Skip these steps if you are not using a television. 1 Check that the TV is connected to the PC. See “Connecting the TV.” Turn on the TV. 2 If you have Media Center open, close it. 3 Right-click an empty part of the PC desktop and click Properties. 4 Click Settings tab. 5 Click the Advanced button. 6 Click nView tab. 7 Click the Clone option. 8 Click the Detect Displays button.
Starting PC Opening Media Center Open Media Center: ■ Press the Start button on the remote control. Or ■ Press a Mode button on the front of the PC. Or ■ TV GUIDE MUSIC PICTURES VIDEOS Click the Media Center icon on the desktop. Or ■ Click Start on the taskbar, choose All Programs, Accessories, Media Center, and then click Media Center again. To find Help in Media Center, press F1 on the keyboard or move the mouse to show the Media Center navigation bar and click Help (the ? button).
Software Programs n After you’ve completed registering, install any software programs that may have come on CDs or DVDs included in the computer box. HP provides software programs and offers to help you use and enjoy your new computer. To open a program, click its icon on the desktop (select programs) or click Start, choose All Programs, and then click the folder or program name. Programs and offers may change. InterVideo WinDVD lets you watch DVD movies and video using an interactive menu.
WordPerfect Productivity Pack provides WordPerfect 10, a word processing program, and Quattro Pro 10, a spreadsheet program, along with a task manager that makes choosing templates easy. For example, you could choose fax in the task manager program and it would open the word processor program and present a blank fax form for you to complete. Quicken Financial Center displays information about Quicken tools that are available on your PC and on the Web.
w If you are using Media Center to record television programs, put the PC into standby mode (instead of turning it off or using hibernation) so that the PC can “wake” at the proper time to record TV programs. w Before turning off the PC, remove media from all drives: CD, DVD, diskette, and the 6-In-1 memory card reader. Media left in a drive may cause an error when you turn on the PC. 28 Turning Off the PC Turn off the PC by using the following steps: 1 Close any open software programs.
Starting PC Manual Standby Mode Press the Standby button on the keyboard or the Standby button on the remote control, or briefly press the On button on the front of the PC. The screen goes dark, and the computer goes into standby mode. The On button on the front of the PC has a power indicator light that flashes when the PC is in standby. Or 1 Click Start on the taskbar. 2 Click Turn Off Computer at the bottom of the menu. 3 Click Stand By.
Manual Hibernation Mode n When you press Shift, the Stand By button changes to Hibernate. If Hibernate is not present, you first need to set up your PC for hibernation by setting the Power Options in the Control Panel. w Do not use hibernate if you have scheduled TV recordings in Media Center. 30 Hibernation differs from standby. When the PC enters standby, it is still active and able to respond to scheduled activities.
Starting PC Automatic Standby or Hibernation Mode To automatically put the computer into standby or hibernation mode when the PC is idle, modify the power management settings: 1 Click Start on the taskbar. 2 Click Control Panel. 3 Click Performance and Maintenance, if it is present. 4 Double-click Power Options. 5 Click the Hibernate tab, select the Enable n If both standby and hibernation timers are set, the system hibernates timer must be set for a longer time than the system standby timer.
32
Using the PC Hardware Keyboard B C A Alphanumeric keys are the main keys found on a standard typewriter. E When locked, the numeric keys are the number keys and arithmetic function keys found on a basic calculator. When the Num Lock LED on the keyboard is off, the numeric keys are directional keys used during games or to move the cursor. Arrow keys are controls for up, down, right and left. You can use these keys instead of the mouse to move the cursor in a Web site, in a document, or in a game.
Keyboard Functions Access buttons user Put PC into or out of standby (power saving) mode ? Connect to HP Web site Log off or switch users 34 hp Open Help and Support Center photo music Open HP Picture Tool Kit video Open My Video folder Open My Music folder
Internet buttons (back-lit display) sports finance connect search Open your Internet browser Go to popular Web sites chat Hardware shopping e-mail Open an HP-related Web site for chatting Search the Internet Open your e-mail Configure the keyboard buttons 1 Click Start on the taskbar. 2 Choose Control Panel. 3 Click Printers and Other Hardware, if it is present. 4 Double-click Keyboard. 5 In the Keyboard Properties window that opens, click the Buttons tab.
Optical drive and Volume buttons n The Volume knob can continue to be turned, even after maximum sound has been reached.
Mouse Using the mouse buttons Like an ordinary mouse, the scrolling mouse has two buttons on the top: the left button, called the primary button, and the right button, called the secondary button. Click the left mouse button to position the cursor or to select an item. Click the right mouse button to display a menu of commands available for the item you clicked. Dragging and dropping You can click and drag an item to move it. 1 Left-click the item, and then press and hold down the left mouse button.
Remote Control Use the remote control to open the Media Center program and use it to view television, record television programs, play previously recorded TV programs, and play music, movies, or video. To use the remote control, simply point it at the remote sensor and press the Start button. Use the remote control at a maximum distance of 26 feet from the remote sensor and at a maximum of 22.5 degrees (45 degrees total) off center of the remote sensor.
Install the remote control batteries Hardware 1 Slide the battery cover off the back of the remote control. n Use alkaline batteries in the remote control. 2 Insert the two AA batteries (provided). 3 Replace the battery cover.
Remote Control Buttons Overview 햲 Standby puts the PC into a power reduced state called standby. An LED located under the Standby button blinks when the remote control is transmitting a signal to the remote sensor. You must press Standby for 1–2 seconds. 햳 This button has no function. 햴 Music opens My Music window. 햵 Recorded TV opens Recorded TV window. 햶 Record records selected television program and stores it on the hard disk. 햷 REW (Rewind) moves the media backward.
CD and DVD Drives Your PC comes with one or two of the following optical drives: CD-RW ■ DVD-ROM ■ DVD+RW/+R ■ combo (DVD/CD-RW) A CD-RW drive may be labeled cd writer plus. A DVD+RW/+R drive may be labeled dvd writer. The combo drive may be labeled dvd/cd writer plus. Handling a CD or DVD To avoid damaging CDs or DVDs, follow these guidelines: ■ ■ Return the disc to the case when you are finished using it. Handle the disc by its outside edges or center hole only.
DVD-ROM Drive cd writer plus dvd writer The DVD-ROM drive can play movie DVDs and music CDs, read data DVDs and CDs, and run CD-based and DVD-based software programs. The cd writer plus is a CD-RW drive. It can play music CDs, read data CDs, run CD-based software, create, or write, music and data CDs, and copy CDs. The dvd writer is a DVD+RW/+R drive. It can play movie DVDs and music CDs, read data CDs and DVDs, and record files to DVD+RW, DVD+R, CD-R, and CD-RW discs.
Opening the RecordNow program The dvd/cd writer plus is a DVD/CD-RW drive. It can play music CDs, read data DVDs and CDs, run CD-based and DVD-based software programs, create, or write, music and data CDs, copy CDs, and play DVD movies. RecordNow is a program that copies and creates CDs and DVDs using your cd writer or dvd writer drives. Using the combo drive When you insert a disc into the combo drive, the computer automatically detects the type of disc.
6-In-1 Memory Card Reader n You can place media in one or more of the card reader slots and access each media independently. Each drive has its own drive letter. SmartMedia MultiMediaCard or Secure Digital (SD) In-use light The 6-In-1 memory card reader (select models) can read and write six types of memory media. Using the 6-In-1 memory card reader 1 Insert the media into the card slot on the reader until it stops and locks into place.
Upgrading and Servicing You can upgrade or replace several components in your computer yourself. Review this chapter for the procedures on accessing and installing parts of your computer. Preparing the Computer Read the following items before attempting to open or service the computer: ■ ■ These procedures assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.
Removing the Side Panels 1 Loosen the two thumbscrews on the right side of the back panel. (You may need a flathead screwdriver. These screws do not detach; they’ll stay on the side panel loosely until you tighten them again.) 2 Pull the panel toward you until it stops. Lift the panel off the chassis and set it aside. 3 If you are replacing an optical drive, remove the other side panel in the same manner. Note that the screws on this panel detach and are loose from the panel.
Locating Components in the PC Chassis 1st optical drive bay Power supply 2nd optical drive bay Drive cage with 3 drives (top to bottom): Hard disk drive Fan duct Diskette (floppy) drive Memory sockets Expansion (Add-In) cards slots 47 Upgrading 6-In-1 memory card reader
Removing the Fan Duct Remove the fan duct when replacing memory, an optical drive, or the drive cage. 1 To disengage the fan duct, push down the two tabs. You can push with your fingers or a pen. 2 Rotate the fan duct down and out to remove it from the chassis. Replacing the Fan Duct 1 To replace the fan duct, hold the fan duct at a 45-degree angle, and align the bottom of the duct with the slot on the fan holder. 2 Rotate the fan duct into position. Make sure it is securely locked.
Accessing the Optical Drives To access the optical drives, you remove the side panels, the front panel, and the fan duct. 1 Remove both side panels. (See page 46.) 2 To release the front panel, locate the three small tabs Release tab (3 each side) on each side of the chassis. Press each tab away from the center of the chassis. Press the top pair, the middle pair, the bottom pair, and then remove the panel. Reverse this step to replace the front panel. 3 Remove the fan duct. (See page 48.
Removing the Optical Drive Your computer comes with one or two optical drives (CD, DVD, or combo) which you can replace or upgrade. These drives are located in the two fixed bays at the top of the chassis. When you are removing the top optical drive, to have better access to the back of the drive, remove the two screws on both optical drives and push both drives part way out through the front of the computer. 1 Locate the two screws on the optical drive and remove them.
Installing a New Optical Drive 1 Make sure the jumper on the new drive is in the CS (Cable Select) position. Slide the new optical drive through the front of the computer. Don’t slide the drive in all the way — you need room to attach the cables. 2 Connect the cables to the back of the drive. 3 Push the drive all the way in, align the screw holes, and insert the screws. 4 Replace the fan duct (see page 48), the front panel (see page 49), and the side panels (see page 46).
Replacing and Adding Drives You can replace the drives that are located in the removable drive cage: hard disk drive, 6-In-1 memory card reader (select models), and diskette (floppy) drive. On PCs with no 6-In-1 memory card reader, you can add a second hard drive by installing it into the drive cage. Removing the drive cage 1 Remove the fan duct. (See page 48.) 2 Remove the cables from the back of the drives that are in the removable drive cage.
Upgrading 53
Removing and replacing the preinstalled hard drive Removing and replacing the diskette drive or the 6-In-1 memory card reader You must remove the hard drive from the chassis if you want to replace it with a higher capacity drive or if you want to safeguard your data when sending the computer out to be repaired. To ensure that the drive fits properly into the chassis, be sure to purchase the replacement drive from HP. 1 Remove the drive cage. (See page 52.
Installing a second hard drive If your PC model does not have a 6-In-1 memory card reader, the bottom slot of the drive cage is empty and can accommodate an additional 3.5-inch hard drive. 1 Remove the drive cage. (See page 52.) 2 Make sure the jumper on the new hard drive is in the CS (Cable Select) position. Slide the new drive into the empty slot in the drive cage until the screw holes align.
Adding Memory n 256 MB memory configurations vary depending on your computer model. 256 MB and 512 MB DIMM memory modules are not compatible with all computer models. The motherboard contains sockets for either DIMMs (dual in-line memory modules) or DDR (double data rate) DIMMs, depending on which PC model you have. To determine which type of memory module your PC uses, go to the HP Web site by typing http://www.hp.com into your Web browser address box and pressing Enter on your keyboard.
Removing a memory module Installing a memory module 1 Remove the fan duct. (See page 48.) 2 Locate the memory sockets on the motherboard. 1 Push down the two retaining clips on the ends of the Move any cabling out of the way, if necessary. 3 Push down the two retaining clips on the ends of the socket until the memory module pops out of the socket. 4 Holding the memory module by its top edge or side edges only, lift it away from the socket. Store it in antistatic packaging. memory socket.
w Be careful of the sharp edges on the expansion slot cover. w Do not overload the PC by installing add-in cards that draw excessive current. The chassis is designed to provide 2 amps (average) of +5 V power for each board or card in the chassis. The total +5 V current draw in a fully loaded chassis (one with all add-in card slots filled) must not exceed the total number of slots multiplied by 2 amps. 58 Removing Add-In Cards 1 Disconnect any external and internal cables attached to the card.
Troubleshooting For help on general and miscellaneous problems you may be experiencing with the PC, refer to the following pages for possible solutions. Look up the description of the problem and try the solution listed. For more detailed information, press the Help button on your keyboard, or click Start on the taskbar and select Help and Support. Problem Solution My computer won’t turn on at all.
Problem Solution I installed a new printer or other device, and it won’t work. ■ Be sure that you installed the device drivers that came with the new device. ■ You may need an updated driver for Windows XP. For non-HP peripherals, contact the vendor directly. For HP peripherals, visit the HP Web site. Refer to your Support Guide for details. ■ When the computer is in standby mode (the On button power indicator light is flashing), moving the mouse will not wake it.
Problem Solution The computer (or part of it) doesn’t seem to be working. (continued) ■ It’s possible that a voltage spike, power outage, or brownout has occurred. Symptoms of voltage spikes include a flickering video display, unexpected computer startups, and the computer not responding to your commands. A voltage spike can occasionally corrupt or destroy files, so it is a good idea to consistently make backup copies of your data files.
Problem Solution When I push one of the special or multimedia buttons on the keyboard, nothing happens. (continued) 5 In the Keyboard Properties window that opens, click the Buttons tab. 6 Double-click the button you want to change. The button configuration window opens. 7 Choose the button capability from the drop-down list. Enter the Display label and the Address information. (For a Web site, enter the complete Web site URL in the Address box.) 8 Click OK. 9 On the Buttons tab, click Apply.
Problem Solution The monitor doesn’t work, even though the computer appears to. ■ Make sure the monitor is turned on — it has its own power button. ■ Adjust the brightness and contrast controls on the monitor. ■ Check the connection of the power cord into the monitor. ■ Check the cable connection between the monitor and the computer. The cable connectors must be pushed in all the way. ■ Make sure the monitor power cord is plugged into a grounded outlet.
Problem Solution The mouse doesn’t work, even though everything else does. (continued) ■ If the pointer doesn’t move on the screen when you move the mouse, clean the mouse. For an optical mouse, wipe the light sensor lens on the bottom of the mouse with a lint-free cloth. For a roller ball mouse: 1 Remove the mouse ball by unscrewing the bottom of the mouse. 2 Clean the mouse ball with a damp cloth (not paper). 3 Use your finger to move the rollers in the mouse ball housing and remove lint and dust.
Use the Restore and Recovery programs to repair your software. Recovery System Recovery CDs The recovery process from the hard drive (either application or operating system) offers the following advantages: HP PCs with Windows XP feature a recovery partition included on the hard disk drive, thus eliminating the need for recovery CDs that may get lost or damaged. ■ Selective: Ensures that the recovery data is matched to the particular PC model.
Using Application Recovery and System Recovery System restore w Before using the HP System Recovery or Application Recovery programs, use system restore. n The system recovery image is in a partition area of the hard drive; this disk space is not available for your use. If software on your hard drive gets erased or damaged, first use the Microsoft system restore feature in Windows XP to restore the computer system and program settings.
Recovery Increasing available hard disk space You can free up space on the hard disk by uninstalling programs or by using the Disk Cleanup utility to remove unneeded files. To uninstall programs: To use the Disk Cleanup utility: 1 Click Start. 2 Click Control Panel. 3 Double-click Add or Remove Programs, if it is 1 Click Start. 2 Choose All Programs. 3 Choose Accessories. 4 Choose System Tools. 5 Click Disk Cleanup. Wait for the calculations to present.
Application recovery If an individual application or software driver accidentally gets erased or damaged, you can reinstall the software by using the HP Application Recovery program. Do not use application recovery to reinstall software programs that came on CDs or DVDs included in the computer box. Reinstall these programs directly from the CDs or DVDs. To start application recovery: 1 Close all applications and folders.
To start system recovery: When other methods of repairing your system software (like system restore or application recovery) fail, you may want to use the HP PC System Recovery program as a last resort to reinstall the software. 1 Turn off the PC. Disconnect all peripheral devices The system recovery program uses a special recovery partition on the hard disk that stores an image of the original operating system software and application software. This disk space is not available for your use.
Important information about recorded TV programs w When you replace the hard disk drive, you can no longer play any previously recorded TV programs. 70 When you replace the hard disk drive, you lose any files or software that you created, saved, or installed on the PC. Because of this, you also lose a special code that Microsoft includes in the files of recorded TV programs. Without the code, Media Center will not play TV programs previously recorded to disk, or copied to DVD or to other media.
Index buttons (continued) optical drive 36 remote control 40 Volume 36 A C accessing optical drives 49 add-in cards locating 47 removing and replacing 58 adding memory 56 adjusting volume 20 application recovery, using 68 applications 26–27 audio cables, connecting 11 audio out analog 17 digital 17 audio out connectors on PC 17 autoscrolling with mouse 37 Cable Select jumper, defined 51 cables for TV connection 12 CD can’t remove from drive 64 handling 41 inserting 41 recording onto 43 CD drive installi
dvd writer drive installing 51 removing 50 using 42 DVD+RW/+R drive. See dvd writer drive dvd/cd writer plus (combo) drive installing 51 removing 50 using 43 DVD/CD-RW drive, using 43 E Easy Internet Sign-up 22 Eject button CD or DVD drive 41 diskette drive 6 error, USB Hub Power Exceeded 64 F fan duct locating 47 removing and replacing 48 finding information 3 floppy drive.
operating system, backup version 66 optical drive buttons 36 optical drives accessing 49 removing and installing 50 panning with mouse 37 ports, location of 7 power management settings 31 printer connecting 8 not working 60 problems.
74
