- Hewlett-Packard Printer User Manual

80 Chapter 1 – Control-panel messages EN

3200 series only

1 Disconnect the power cable from the product, wait at least 30

seconds, reconnect the power cable, and then wait for the product

to initialize.

2 If the error persists, replace the formatter.

4100 series only

X = Location of problem

0 = Internal memory

1 to 4 = DIMM slot 1, 2, 3, or 4

1 Reseat the specified DIMM.

2 Replace the specified DIMM.

1 Turn the printer off and then on.

2 Perform a cold reset.

3 If the message persists, replace the formatter or firmware DIMM.

62.x Printer error

64.x Printer error alternates with

Cycle power