Operation Manual

120 Chapter 5 - Removal and replacement
EN
Bottom assemblies
ECU pan
Remove the left side, back, and right side covers (see pages 80
through 86).
1 Unplug the three spade connectors (callout 1).
2 Disconnect the motor cable connector (callout 2) on the side of
the motor.
3 Unplug the fuser cable connector (callout 3) by pressing and
releasing the tab on the back of the connector.
4 Unplug all other cable connectors (callout 4) from the ECU.
Figure 64. Removing the ECU pan (1 of 4)
2
2
2
3
4
1
2
2