Operation Manual

Load the Main input tray

Introduction

The following information describes how to load paper in the Main input tray. This tray holds up to 250 sheets of

75 g/m

(20 lb) paper.

NOTE: To avoid paper jams:

● Never add or remove paper from the Main input tray during printing.

● Before loading the tray, remove all of the paper from the input tray and straighten the stack.

● When loading the tray, do not fan the paper.

● Use paper that is not wrinkled, folded, or damaged.

1. Open the Main input tray door by grasping the

handle and pulling down.

2. Adjust the paper-width guides by squeezing the

adjustment latch on the right guide and sliding the

guides to the size of the paper being used.

ENWW Load the Main input tray 21