Operation Manual

HP PCL-6 driver This product-specic print driver supports Windows 8 and newer operating systems that

support version 4 drivers. For a list of supported operating systems, go to www.hp.com/go/

support.

HP UPD PS driver

● Recommended for printing with Adobe

software programs or with other highly

graphics-intensive software programs

● Provides support for printing from postscript emulation needs, or for postscript ash

font support

HP UPD PCL 6 ● Recommended for printing in all Windows environments

● Provides the overall best speed, print quality, and printer feature support for most

users

● Developed to align with Windows Graphic Device Interface (GDI) for best speed in

Windows environments

● Might not be fully compatible with third-party and custom software programs that are

based on PCL 5

Check the EconoMode settings

HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might

outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable,

consider replacing the toner cartridge.

NOTE: This feature is available with the PCL 6 print driver for Windows. If you are not using that driver, you can

enable the feature by using the HP Embedded Web Server.

Follow these steps if the entire page is too dark or too light.

1. From the software program, select the Print option.

2. Select the printer, and then click the Properties or Preferences button.

3. Click the Paper/Quality tab, and locate the Print Quality area.

4. If the entire page is too dark, use these settings:

● Select the 600 dpi option.

● Select the EconoMode check box to enable it.

If the entire page is too light, use these settings:

● Select the FastRes 1200 option.

● Clear the EconoMode check box to disable it.

5. Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to