- HP Printer User Manual

ENWW Scanner section 149
MFP disassembly/assembly
6 Hook the spring scale on the upper hole of
the scanner motor (M11).
7 Pull the spring scale upward until a
tension of 2 ± 0.2 kg is indicated. Tighten
the four screws.
CAUTION Make sure that the scanner
motor moves up and down
when confirming the
tension pressure.
8 Insert the connector to the scanner motor
(M11).
9 Follow the disassembly procedures in
reverse order to install.
Spring scale
Upper hole
Spring scale
Scanner motor (M11)
Screws