- Hewlett-Packard Printer User Guide

122 Chapter 6 Problem solving ENWW
Paused
To return to ready
press STOP
The product is paused but no errors. exist The product will continue to receive
data until the memory is full.
PERFORM PRINTER
MAINTENANCE
For help press
The printer has passed its prescribed printed page threshold between
maintenance procedures.
To ensure optimum print quality, the printer prompts you to perform routine
maintenance every 350,000 pages. To order a printer maintenance kit, see the
HP support flyer or go to www.hp.com/support/lj9050_lj9040.
Performing
upgrade
The printer is performing a firmware upgrade.
Receiving upgrade The printer is receiving a firmware upgrade.
Reinsert Duplexer The duplexer has been removed. Reinsert it.
Request accepted
please wait
A user requested an internal page. When the current job has finished, the
internal page will be printed.
REPLACE CARTRIDGE
For help press
The print cartridge has reached the “out” level. The CARTRIDGE=LOW menu has
been set to CONTINUE. Printing will continue until no more toner is available.
REPLACE STAPLER
CARTRIDGE
To continue press
The external stapling device is out of staples. Replace the staple cartridge.
REPLACE STAPLES
To continue press
The external stapling device is out of staples. Replace the staple cartridge.
SANITIZING DISK
<x>% COMPLETE
Do not power off
The hard disk or compact flash disk is being cleaned. Contact your network
administrator.
SIZE MISMATCH IN
TRAY xx
For help press
Tray xx is loaded with paper that is longer or shorter in the feed direction than
the size configured for the tray.
STAPLER ALIGN ERROR The paper in the external paper handling device is not aligned.
STAPLER LOW
ON STAPLES
For help press
The stapler device is running out of staples and needs to be refilled.
STAPLER OUT OF
STAPLES
For help press
The stapler device is out of staples and needs to be refilled.
STAPLING INTERRUPTION Remove the jammed staple.
Message Explanation or recommended action