- Hewlett-Packard LaserJet Owner's Manual
Table Of Contents
- Printer Setup
- Contents
- Introduction
- Installation checklist
- Step 1 Prepare printer location
- Step 2 Check package contents
- Step 3 Locate printer parts
- Step 4 Remove internal packaging
- Step 5 Install accessories
- Step 6 Install print cartridge
- Step 7 Load Trays 2 and 3
- Step 8 Connect printer cables
- Step 9 Connect power cord
- Step 10 Change the control panel overlay
- Step 11 Configure the control panel display language
- Step 12 Print a configuration page
- Step 13 Install printing software
- Step 14 Verify printer setup
- Customer support options worldwide
- Warranty and regulatory information
- Declaration of Conformity
ENWW Print a configuration page 23
Step 12 Print a configuration page
Print a configuration page to make sure the printer is operating
correctly.
To print a configuration page
1 Press 22 on the numeric keypad. The configuration page prints. If
you have an HP Jetdirect printer server installed in the printer, an
HP Jetdirect network configuration page also prints.
2 If you have optional accessories such as a duplex printing
accessory or Tray 4 installed, check the configuration page to
ensure that it lists them as installed.