- Hewlett-Packard LaserJet Printer Service Manual

To reinstall

After placing the Pickup Roller shaft through on the left side, line up the Idler

Roller tabs while repositioning the right side. Rock the shaft back and forth until the

Pickup Roller and the Idler Roller tabs are correctly reinstalled.

Note

It is important that the Pickup Roller is placed back in with the two Idler Roller tabs

up, so that they fit into the underside of the metal chassis behind the Laser/Scanner

assembly (Figure 6-25).

Paper Pickup Roller Assembly Replacement

(Inside/Front View)

Figure 6-25

Removal and

Replacement

Removal and Replacement 6 - 29