- HP LaserJet Printer Service Manual

EN Top assemblies 97
Paper Feed Frame
1 Remove the Printer Covers.
2 Remove the Pickup Roller Assembly (Figures 6-23 through 6-24).
3 Disconnect the following:
• Solenoid from the DC Controller at J204 (Figure 6-22, callout 1)
• Two connectors from the Laser/Scanner (Figure 6-26, callout 1)
• Connector from Top Cover/EP Cartridge Sensor on HP LaserJet 5L only (Figure 6-26, callout
2)
• Connector from Switch 101 (Figure 6-26, callout 3)
• Connector from Front Control Panel (Figure 6-26, callout 4)
Figure 6-26 Paper Feed Frame removal (1 of 4)
1
2
3
4
Service.book Page 97 Thursday, September 14, 2000 11:15 AM