- HP LaserJet Printer Service Manual

EN Top assemblies 107
4 Remove the self-tapping screw that holds the Feed Assembly in place (Figure 6-36, callout 1).
Note Before proceeding to Step 5, examine the tabs and how they fit into their slots (Figure 6-36, callout 2).
The tabs must be reinstalled to exactly this position.
Note The connector shown (Figure 6-36, callout 3) is not present on the HP LaserJet 6L Pro. On that model,
the wiring harness is connected to the DC Controller.
5 Remove the Feed Assembly.
Figure 6-36 Feed Assembly removal (2 of 3)
1
2
3
Service.book Page 107 Thursday, September 14, 2000 11:15 AM