- HP LaserJet Printer Service Manual

EN Top assemblies 103
To reinstall
If the spring on the Kick Plate does not stay on the Kick Plate, replace the spring, making certain the
diameter of the spring surrounds two lower pins on the Kick Plate and rests inside the third pin. Use
needlenose pliers to place the spring correctly. (See Figure 6-32.)
Figure 6-32 Kick Plate Spring replacement
While rotating the Kick Plate into place, guide the other end of the spring onto the silver grounding
plate located on the Paper Feed Frame.
Service.book Page 103 Thursday, September 14, 2000 11:15 AM