- Hewlett-Packard LaserJet Printer Owner's Manual

ENWW Chapter 2: Printing Tasks 29
Loading Tray 2
The following instructions are for
loading Tray 2 or an optional 250-sheet
paper tray. For supported sizes of
paper, see page A-5.
Note
To avoid paper jams, do not load trays
while the printer is printing.
1 Pull the tray completely out of the
printer. Lift the tray cover.
2 Rotate the dial in the tray so the
printer will read the correct size of
paper. The toggle switch accesses
more sizes. An error might occur if
the dial is not set properly.
Note
Setting the dial adjusts the printer’s
sensors. It does not adjust the guides
inside the tray.
3 Make sure the paper size setting
matches the size of paper loaded, or
the printer might jam or other errors
might occur.
4 Tilt the blue rear guide toward the
front of the tray to detach it.
Continued on the next page.