- Hewlett-Packard LaserJet Printer User's Guide

OPERATING
How to turn the system on
Note:
Power ON Printer and the TowerTray will automatically
power on by it self if the Printer is plugged in at the
TowerTray’s power outlet.
Manual 0545 13 TowerTray
TM
for the HP LaserJet 4200 / 4300 / 4250 / 4350
Printer plugged in at the TowerTray’s power outlet
Power cord supplied
with shi
p
men
t
Note:
The TowerTray’s power inlet and power outlet are
supplied with line voltage, if TowerTray is pluged in.
Original Printer power cord
Upgrade for HP LaserJet 4250 / 4350
Note:
Make sure that your HP LaserJet 4250 or 4350 has been manufactured after Mai 2005 (a serial no.
higher than XXXX) to be able to enjoy the TowerTray’s performance also with those printers. Otherwise
the printer/TowerTray system will have an extreme low throughput due to printer problems only affecting
TowerTray. Earlier HP LaserJet 4250 or 4350 printers can be upgraded to work with TowerTray (an
exchange of the printers DC-controller is required). Please contact the HP Help Line for further
information and refer to service note Q5400A-02.