- Hewlett-Packard LaserJet User Guide

170 Appendix B Printer memory and expansion ENWW

Installing memory

If you have not already done so, print a configuration page to find out how much memory is

installed in the printer before adding more memory. (See “Configuration page” on page 83.)

To install memory

CAUTION

Static electricity can damage DIMMs. When handling DIMMs, either

wear an antistatic wrist strap or frequently touch the surface of the

DIMM antistatic package, then touch bare metal on the printer.

1 Turn the printer power off.

2 Unplug the power cord and disconnect any cables.

3 Grasp the cover on the right side of the printer and pull it firmly

toward the rear of the printer until it stops.

4 Remove the cover from the printer.

5 Open the DIMM-access door by pulling on the metal tab.