- Hewlett-Packard LaserJet Printer User's Guide

20 Chapter 1: Printer Basics
EN
Software for Networks
HP JetAdmin
HP JetAdmin should be installed only on the network administrator’s
computer. HP JetAdmin can be accessed by clicking the
Start
button (point to
Settings
, and then click
Control Panel
) in
Windows 95 and Windows NT 4.0 or from the HP LaserJet program
group folder. Use HP JetAdmin to do the following:
• Install, configure, and manage printers on a network that are
connected with a JetDirect print server.
• Perform in-depth diagnostics on the printer and network.
The HP JetAdmin software works on the following network systems:
• Windows NT
• Windows 95
• Windows 3.1x
• Novell NetWare
• HP-UX*
• Solaris*
• SunOS*
• OS/2*
*The software for these systems is not included on the compact disc
with the printer, but is available from the Internet. If you do not have
access to the Internet, see the HP Support pages at the front of this
user’s guide to obtain this software.
Note
Network Administrators: If the printer is attached to a network,
before you can print, the printer must be configured for that network
using HP JetAdmin or similar network software. (See the getting
started guide.)