- Hewlett-Packard Printers Getting Started Guide

EN
Getting Started Guide 19
Connecting to Apple LocalTalk Network
Use the LocalTalk port to connect to a
Apple LocalTalk network.
Caution
Make sure the printer is turned off
before connecting to the LocalTalk
port.
1 Carefully check the orientation of
the pins on the LocalTalk cable with
the LocalTalk port.
2 Connect the cable to the port.
Connect the other end of the cable to
the proper connector on the computer.
Note
The HP JetDirect 600N print server
card supports a LocalTalk and one
Ethernet cabling connection at the
same time.
Note
See the printer user’s guide for
information on ordering a Macintosh
Computer serial cable.