Operation Manual

To set the auto continue
1. Press M
ENU to open the menus.
2.
Press
(D OWN button) to highlight CONFIGURE DEVICE.
3.
Press
(S ELECT button) to select CONFIGURE DEVICE.
4.
Press
(D OWN button) to highlight SYSTEM SETUP.
5.
Press
(S ELECT button) to select SYSTEM SETUP.
6.
Press
(D OWN button) to highlight AUTO CONTINUE.
7.
Press
(S ELECT button) to select AUTO CONTINUE.
8.
Press
(U P button) or (D OWN button) to select the appropriate setting.
9.
Press
(S ELECT button) to set the selection.
10. Press M
ENU to exit the menu.
Cartridge low
The printer has two options for reporting that print cartridge life is low: CONTINUE is the
default value.
● Select CONTINUE to allow the printer to continue printing while a warning appears and
until the print cartridge is replaced.
● Select STOP if you want the printer to pause printing until you replace the used print
cartridge or press
(S ELECT button), which allows the printer to print while the warning
appears.
To set supplies-low reporting
1. Press M
ENU to open the menus.
2.
Press
(D OWN button) to highlight CONFIGURE DEVICE.
3.
Press
(S ELECT button) to select CONFIGURE DEVICE.
4.
Press
(D OWN button) to highlight SYSTEM SETUP.
5.
Press
(S ELECT button) to select SYSTEM SETUP.
6.
Press
(D OWN button) to highlight CARTRIDGE LOW.
7.
Press
(S ELECT button) to select CARTRIDGE LOW.
8.
Press
(U P button) or (D OWN button) to select the appropriate setting.
9.
Press
(S ELECT button) to set the selection.
10. Press M
ENU to exit the menu.
ENWW Control panel 19