Operation Manual

Item Values Explanation
TRAY [N] CUSTOM UNIT OF MEASURE
X DIMENSION
Y DIMENSION
This item appears only if a tray
is set to a custom size.
UNIT OF MEASURE: Use this
option to select the unit of
measure (INCHES or
MILLIMETERS)to use when
you set custom paper sizes for
the specified tray.
X DIMENSION: Use this item
to set the measurement of the
width of the paper
(measurement from side to
side in the tray). The options
are 3.0 to 8.50 INCHES or 76
to 216 MM.
Y DIMENSION: Use this item
to set the measurement of the
length of the paper
(measurement from front to
back in the tray). The options
are 5.0 to 14.00 INCHES or
127 to 356 MM.
After the Y DIMENSION value
is selected, a summary screen
appears. This screen contains
feedback that summarizes all
of the information that was
specified on the previous three
screens, such as TRAY 1
SIZE= 8.50 x 14 INCHES,
Setting saved.
164 Appendix B Control panel menus ENWW