QuickSpecs HP 5800 Switch Series Overview HP 5800-24G-PoE+ Switch HP 5800-24G Switch HP 5800-24G-SFP Switch DA - 13807 Worldwide — Version 25 — March 19, 2014 Page 1
QuickSpecs HP 5800 Switch Series Overview HP 5800-48G-PoE Switch HP 5800-48G Switch HP 5800-48G Switch with 2 Slots DA - 13807 Worldwide — Version 25 — March 19, 2014 Page 2
QuickSpecs HP 5800 Switch Series Overview HP 5800AF-48G Switch Models HP 5800-24G-PoE+ Switch HP 5800-24G Switch HP 5800-24G-SFP Switch HP 5800-48G-PoE Switch HP 5800-48G Switch HP 5800-48G Switch with 2 Slots HP 5800AF-48G Switch JC099A JC100A JC103A JC104A JC105A JC101A JG225A Key features For enterprise edge, distribution, data center Cut-through design with low latency Support for up to 84 ports OAA module for flexible deployment Redundant, hot-swappable power supplies, fans Product overview HP 5
QuickSpecs HP 5800 Switch Series Overview creates traffic classes based on access control lists (ACLs), IEEE 802.
QuickSpecs HP 5800 Switch Series Overview transitions from IPv4 to IPv6, supporting connectivity for both protocols MLD snooping forwards IPv6 multicast traffic to the appropriate interface IPv6 ACL/QoS supports ACL and QoS for IPv6 network traffic, preventing traffic flooding IPv6 routing supports IPv6 static routes and IPv6 versions of RIP, OSPF, IS-IS, and BGP routing protocols Performance Hardware-based wire-speed access control lists (ACLs) feature-rich ACL implementation (TCAM-based) helps provide h
QuickSpecs HP 5800 Switch Series Overview Gigabit Ethernet port aggregation allows grouping of ports to increase overall data throughput to a remote device 10 GbE port aggregation allows grouping of ports to increase overall data throughput to a remote device Spanning Tree/MSTP, RSTP, and STP Root Guard prevent network loops IPFIX/sFlow allows traffic sampling Spanning Tree Protocols (STP, MSTP, and RSTP) and STP root guard helps prevent network loops; up to 32 MSTP instances available Layer 3 services Ad
QuickSpecs HP 5800 Switch Series Overview Security Unicast Reverse Path Forwarding (URPF) allows normal packets to be forwarded correctly, but discards the attaching packet due to lack of reverse path route or incorrect inbound interface; prevents source spoofing and distributed attacks; supports distributed UFPF Defense-in-depth security provides integrated and distributed security enforcement that can be managed from a central location, such as the HP Intelligent Management Center (IMC) Advanced process
QuickSpecs HP 5800 Switch Series Overview Port mirroring enables traffic on a port to be simultaneously sent to a network analyzer for monitoring OAM (IEEE 802.3ah) operational, administration and maintenance (OAM) management capabilities detects data link layer problems that occurred in the "last mile"; monitors the status of the link between the two devices CFD (IEEE 802.
QuickSpecs HP 5800 Switch Series Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
QuickSpecs HP 5800 Switch Series Configuration 48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U- Height See Configuration Note:1, 3 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) JC105A#B2B PDU Cable ROW C15 PDU Jumper Cord (ROW) JC105A#B2C HP 5800AF-48G Switch 48 RJ-45 autosensing 10/100/1000 ports 6 fixed 1000/10000 SFP+ ports min=0 \ max=6 SFP+ Transceivers Must select min 1 Power Supply
QuickSpecs HP 5800 Switch Series Configuration HP X130 10G SFP+ LC ER 40km Transceiver HP X125 1G SFP LC LH40 1310nm Transceiver HP X120 1G SFP LC LH40 1550nm Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X125 1G SFP LC LH70 Transceiver HP X120 1G SFP RJ45 T Transceiver HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 1.
QuickSpecs HP 5800 Switch Series Configuration 24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height See Configuration Note:1, 3, 6,10 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) JC100A#B2B PDU Cable ROW C15 PDU Jumper Cord (ROW) JC100A#B2C HP 5800-24G-PoE Switch 24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceiver
QuickSpecs HP 5800 Switch Series Configuration C15 PDU Jumper Cord (ROW) HP 5800AF-48G Switch 48 RJ-45 autosensing 10/100/1000 ports 6 fixed 1000/10000 SFP+ ports (min=0 \ max=6 SFP+ Transceivers) Must select min 1 Power Supply Must select min 2 Fan Trays 1U - Height JG225A See Configuration Note:1, 8, 10 HP 5800-48G-PoE Switch 48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height JC104A See Configur
QuickSpecs HP 5800 Switch Series Configuration HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable Note 3 Localization required on orders without #B2B, #B2C or #B2E options.
QuickSpecs HP 5800 Switch Series Configuration HP 5800-24G Switch 24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U - Height JC100A See Configuration Note:1, 3, 10 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) JC100A#B2B PDU Cable ROW C15 PDU Jumper Cord (ROW) JC100A#B2C HP 5800-24G-PoE Switch 24 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0
QuickSpecs HP 5800 Switch Series Configuration PDU Cable ROW C15 PDU Jumper Cord (ROW) JC105A#B2C HP 5800AF-48G Switch 48 RJ-45 autosensing 10/100/1000 ports 6 fixed 1000/10000 SFP+ ports (min=0 \ max=6 SFP+ Transceivers) Must select min 1 Power Supply Must select min 2 Fan Trays 1U - Height JG225A See Configuration Note:1, 8, 10 HP 5800-48G-PoE Switch 48 RJ-45 autosensing 10/100/1000 ports 1 extended module slot 4 fixed 1000/10000 SFP+ ports min=0 \ max=4 SFP+ Transceivers Power Supply included 1U -
QuickSpecs HP 5800 Switch Series Configuration HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JD095C JD096C JD097C JG081C Note 3 Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) .
QuickSpecs HP 5800 Switch Series Configuration HP 5800 4-port 10GbE SFP+ Module min=0 \ max=4 SFP and SFP + Transceivers JC091A See Configuration Note:1 HP 5800 2-port 10GbE SFP+ Module min=0 \ max=2 SFP and SFP + Transceivers JC092B See Configuration Note:1 HP 5800 16-port Gig-T Module No Transceivers JC094A Configuration Rules: Note 1 The following Transceivers install into this Module: (Use #0D1 if switch is CTO) If Applicable HP X130 10G SFP+ LC SR Transceiver HP X130 10G SFP+ LC LRM Transceive
QuickSpecs HP 5800 Switch Series Configuration HP X125 1G SFP LC LH70 Transceiver JD063B Access Control Modules (JC101x and JG242x Switch Only ) System (std 0 // max 1) User Selection (min 0 // max 1) per chassis HP 5800 ACM for 32-64 Aps No Transceivers JD443A HP 5800 ACM for 64-256 Aps No Transceivers JD441A See Configuration Note:1 HP 5820 VPN Firewall Module No Transceivers JD255A See Configuration Note:1 Configuration Rules: Note 1 This Module install to the following switches only: JC101x -
QuickSpecs HP 5800 Switch Series Configuration HP X110 100M SFP LC LH80 Transceiver HP X115 100M SFP LC FX Transceiver HP X110 100M SFP LC LX Transceiver HP X110 100M SFP LC BX 10-U Transceiver HP X110 100M SFP LC BX 10-D Transceiver HP X120 1G SFP LC LH40 1550nm XCVR HP X120 1G SFP RJ45 T Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X125 1G SFP LC LH40 1310nm XCVR HP X125 1G SFP LC LH70 Transceiver JD091A JD102B JD120B JD100A JD101A JD062A JD089B JD118B JD119B JD061A
QuickSpecs HP 5800 Switch Series Configuration See Configuration Note:1, 4 HP 5800 750W AC PoE Power Supply JC089A See Configuration Note:1, 2, 4 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) JC089A#B2B PDU Cable ROW C15 PDU Jumper Cord (ROW) JC089A#B2C HP A58x0AF 650W AC Power Supply includes 1 x c13, 650w JC680A See Configuration Note:1, 2, 6 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) JC680A#B2B JC680A#B2C PDU Cable ROW C15 PDU Jumper Cord (ROW) HP 58x0AF 650W DC Pow
QuickSpecs HP 5800 Switch Series Configuration Drop down under power supply should offer the following options and results: Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
QuickSpecs HP 5800 Switch Series Configuration License HP WX5000 32 AP License Upgrade JD463A See Configuration Note:1 Configuration Rules: Note 1 If this license is selected, Then one of these modules should be selected or be on site: JD443A - HP A5800 Access Controller Module for 32-64 Aps JD441A - HP A5800 Access Controller Module for 64-256 Aps External Redundant Power Supplies HP RPS 800 Redundant Power Supply Height = 1U includes 1 x c13 JD183A See Configuration Note:2, 4 HP RPS1600 Redundant
QuickSpecs HP 5800 Switch Series Configuration HP X290 1000 A JD5 Non-PoE 2m RPS Cable JD188A See Configuration Note:2 HP X290 1000 B JD5 2m RPS Cable JD189A See Configuration Note:4 HP X290 500/800 1m RPS Cable JD190A See Configuration Note:1 Configuration Rules: Note 1 This Cable is only supported on switches JC105A and JC100A when used with the RPS 800 (JD183A) Note 2 This Cable is only supported on switch JC103A when used with the RPS 1600 (JG136A) Note 3 This Cable is only supported on swi
QuickSpecs HP 5800 Switch Series Technical Specifications HP 5800-24G-PoE+ Switch (JC099A) Ports Physical characteristics 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 extended module slot 4 fixed 1000/10000 SFP+ ports 1 RJ-45 serial console port Dimensions 17.3(w) x 16.8(d) x 1.71(h) in (43.94 x 42.67 x 4.34 cm) (1U height) Weight 17.
QuickSpecs HP 5800 Switch Series Technical Specifications Flicker Management Services EN 61000-3-3, IEC 61000-3-3 IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP 3-year, 4-hour onsite, 13x5 coverage for hardware (UV882E) 3-year, 4-hour onsite, 24x7 coverage for hardware (UV885E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV888E) 3-year, 24x7 SW phone support, software updates (UV891E) 1-year,
QuickSpecs HP 5800 Switch Series Technical Specifications Memory and processor 1024 MB SDRAM, 512 MB flash; packet buffer size: 4 MB Performance Latency 4.02 µs (Store and Forward) (64-byte packets) Throughput 155 million pps Routing/Switching capacity 208 Gbps Routing table size 16000 entries MAC address table size 32000 entries Operating temperature 32°F to 113°F (0°C to 45°C) Operating relative humidity 10% to 90% Acoustic Low-speed fan: 42.3 dB, High-speed fan: 52.
QuickSpecs HP 5800 Switch Series Technical Specifications 4-year, 4-hour onsite, 13x5 coverage for hardware (UV883E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UV886E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV889E) 4-year, 24x7 SW phone support, software updates (UV892E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV884E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UV887E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV890E)
QuickSpecs HP 5800 Switch Series Technical Specifications Environment Operating temperature 32°F to 113°F (0°C to 45°C) Operating relative humidity 10% to 90% Acoustic Low-speed fan: 49.6 dB, High-speed fan: 58.1 dB Electrical characteristics Maximum heat dissipation Safety Emissions Immunity Management Notes Services 498 BTU/hr (525.
QuickSpecs HP 5800 Switch Series Technical Specifications 5-year, 4-hour onsite, 24x7 coverage for hardware (UV887E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV890E) 5-year, 24x7 SW phone support, software updates (UV893E) 3 Yr 6 hr Call-to-Repair Onsite (UW969E) 4 Yr 6 hr Call-to-Repair Onsite (UW970E) 5 Yr 6 hr Call-to-Repair Onsite (UW971E) 1-year, 24x7 software phone support, software updates (HR567E) 1-year, 24x7 software phone support, software updates + Next Business
QuickSpecs HP 5800 Switch Series Technical Specifications Electrical characteristics Maximum heat dissipation Safety Emissions Immunity Management Services 3320 BTU/hr (3502.6 kJ/hr) Voltage 100-120/200-240 VAC Frequency 50/60 Hz UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No.
QuickSpecs HP 5800 Switch Series Technical Specifications 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (HS666E) 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS667E) Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
QuickSpecs HP 5800 Switch Series Technical Specifications Management Services Conducted EN 61000-4-6; IEC 61000-4-6 Power frequency magnetic field IEC 61000-4-8; EN 61000-4-8 Voltage dips and interruptions EN 61000-4-11; IEC 61000-4-11 Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP 3-year, 4-hour onsite, 13x5 coverage for hardware (HQ063E) 3-year, 4-hour
QuickSpecs HP 5800 Switch Series Technical Specifications Power supplies Physical characteristics 2 power supply slots 1 minimum power supplies required (ordered separately) Dimensions 17.32(w) x 18.31(d) x 3.39(h) in (44.0 x 46.5 x 8.61 cm) (2U height) Weight 39.7 lb (18.0 kg) Memory and processor 1024 MB SDRAM, 512 MB flash; packet buffer size: 8 MB Performance Latency 4.
QuickSpecs HP 5800 Switch Series Technical Specifications Notes Services Customer must order power supply, as the device does not come with a PSU. At least one JC087A/JC090A/JC089A is required.
QuickSpecs HP 5800 Switch Series Technical Specifications Physical characteristics Dimensions 17.32(w) x 25.98(d) x 1.72(h) in (43.99 x 65.99 x 4.37 cm) (1U height) Weight 22.
QuickSpecs HP 5800 Switch Series Technical Specifications Services Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. Standards and protocols (applies to all products in series) General protocols IEEE 802.1ag Service Layer OAM IEEE 802.1D MAC Bridges IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.1s (MSTP) IEEE 802.
QuickSpecs HP 5800 Switch Series Technical Specifications RFC 4291 IP Version 6 Addressing Architecture RFC 4675 RADIUS VLAN & Priority RFC 4762 Virtual Private LAN Service (VPLS) Using Label Distribution Protocol (LDP) Signaling IP multicast RFC 2934 Protocol Independent Multicast MIB for IPv4 RFC 3376 IGMPv3 (host joins only) RFC 3618 Multicast Source Discovery Protocol (MSDP) RFC 3973 Draft 2 PIM Dense Mode RFC 4601 PIM Sparse Mode IPv6 RFC 2080 RIPng for IPv6 RFC 2460 IPv6 Specification RFC 2710 Multi
QuickSpecs HP 5800 Switch Series Accessories HP 5800 Switch Series accessories Modules HP 5800 4-port 10GbE SFP+ Module HP 5800 2-port 10GbE SFP+ Module HP 5800 16-port Gig-T Module HP 5800 16-port GbE SFP Module Transceivers HP X124 1G SFP LC LH40 1310nm Transceiver HP X120 1G SFP LC LH40 1550nm Transceiver HP X125 1G SFP LC LH70 Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X120 1G SFP RJ45 T Transceiver HP X120 1G SFP LC BX 10-U Transceiver HP X120 1G SFP LC BX 10-D
QuickSpecs HP 5800 Switch Series Accessories HP RPS1600 1600W AC Power Supply EPS/RPS HP 5800 PoE Module Fan Tray HP 5800 2RU Spare Fan Assembly HP 5800 1RU Spare Fan Assembly Appliance HP 5820 VPN Firewall Module HP 5800-48G Switch with 2 Slots (JC101A) HP 5820 VPN Firewall Module HP 5800AF-48G Switch (JG225A) HP 58x0AF 650W AC Power Supply HP 58x0AF 650W DC Power Supply HP 58x0AF Back (power side) to Front (port side) Airflow Fan Tray HP 58x0AF Front (port side) to Back (power side) Airflow Fan Tray DA
QuickSpecs HP 5800 Switch Series Accessory Product Details NOTE: Details are not available for all accessories. The following specifications were available at the time of publication. HP X125 1G SFP LC LH40 1310nm Transceiver (JD061A) Ports Connectivity 1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics) Connector type LC Wavelength 1310 nm Physical characteristics Dimensions 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.
QuickSpecs HP 5800 Switch Series Accessory Product Details HP X125 1G SFP LC LH70 Transceiver (JD063B) A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber. Ports 1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics) Connectivity Connector type LC Wavelength 1550 nm Physical characteristics 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm) Full configuration weight 0.04 lb. (0.
QuickSpecs HP 5800 Switch Series Accessory Product Details HP X120 1G SFP LC LX Transceiver (JD119B) Ports 1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX) Connectivity Connector type LC Wavelength 1300 nm A small form-factor pluggable (SFP) Gigabig LX Physical characteristics transceiver that provides a full duplex Gigabit solution up to 550m on MMF or Electrical characteristics 10Km on SMF Cabling 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm) Full configuration weight 0.04 lb.
QuickSpecs HP 5800 Switch Series Accessory Product Details HP X120 1G SFP LC BX 10- Ports U Transceiver (JD098B) Connectivity A small form-factor Physical characteristics pluggable (SFP) Gigabit LXBX10-U transceiver that provides a full duplex Gigabit solution up to Electrical characteristics 10km on a single mode cable. Cabling Services Services 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm) Full configuration weight 0.04 lb. (0.02 kg) Power consumption typical 0.
QuickSpecs HP 5800 Switch Series Accessory Product Details HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A) Notes Services HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A) Notes Services Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
QuickSpecs HP 5800 Switch Series Accessory Product Details HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A) Notes Services HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A) Notes Services Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
QuickSpecs HP 5800 Switch Series Accessory Product Details HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A) Notes Services HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A) Notes Services Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
QuickSpecs HP 5800 Switch Series Accessory Product Details HP RPS1600 Redundant Power System (JG136A) Ports Physical characteristics 8 redundant power supply ports Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE) Dimensions 15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42 cm) Weight 14.11 lb. (6.4 kg) Full configuration weight 16.75 lb. (7.
QuickSpecs HP 5800 Switch Series Accessory Product Details HP RPS1600 1600W AC Power Supply (JG137A) Physical characteristics Environment Dimensions Weight 8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15 cm) 3.02 lb. (1.
QuickSpecs HP 5800 Switch Series Accessory Product Details - 4K VLAN Firewall operation mode - Routing mode - Transparent mode - Hybrid mode AAA service - Local Authentication - Standard Radius - HWTACACS+ - RADIUS domain Authentication ASPF - General TCP / UDP application - FTP/SMTP/HTTP/RTSP/H323 Protocol State Detection - SIP/MGCP/QQ/MSN Protocol State Detection - Java/ActiveX Blocking and Detection - Port mapping - Support for the fragmented packets Virtualization - 256 Virtual Firewall - 4 default Se
QuickSpecs HP 5800 Switch Series Accessory Product Details - NAT traversal - Strategy template IKE - DH - Pre-share Key authentication-method - Support aggressive mode and main exchange mode - IKE DPD, PKI / CA Network Feature - 802.
QuickSpecs HP 5800 Switch Series Accessory Product Details Services - Radius - NAT64 3-year, parts only, global next-day advance exchange (UZ914E) 3-year, 4-hour onsite, 13x5 coverage for hardware (UZ915 ) 3-year, 4-hour onsite, 24x7 coverage for hardware (UZ918E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UZ922E) 3-year, 24x7 SW phone support, software updates (UZ925E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UZ916E) 4-year, 4-hour onsite, 24x7 co
QuickSpecs HP 5800 Switch Series Accessory Product Details RFC 2868 RADIUS Attributes for Tunnel Protocol Support RFC 2869 RADIUS Extensions draft-grant-tacacs-02 (TACACS) VPN RFC 1701 Generic Routing Encapsulation (GRE) RFC 1702 Generic Routing Encapsulation over IPv4 networks.