- Hewlett-Packard Printer User Manual

HP Jetdirect EIO Control Panel Menus 41
ENWW
CONFIG
METHOD
Specifies the method that TCP/IP
parameters will be configured on the
Jetdirect print server.
● BOOTP: Use BootP (Bootstrap
Protocol) for automatic configuration
from a BootP server.
● DHCP: Use DHCP (Dynamic Host
Configuration Protocol) for automatic
configuration from a DHCP server. If
selected and a DHCP lease exists,
DHCP RELEASE and DHCP
RENEW menus will be available to set
DHCP lease options.
● AUTO IP: Use automatic link-local IP
addressing. An address in the form
169.254.x.x will be automatically
assigned.
● MANUAL: Use the Manual Settings
option to configure TCP/IP
parameters.
DHCP RELEASE This menu appears if CONFIG METHOD
was set to DHCP and a DHCP lease for
the print server exists.
● NO (default): The current DHCP lease
is saved.
● YES: The current DHCP lease along
with the leased IP address are
released.
DHCP RENEW This menu appears if CONFIG METHOD
was set to DHCP and a DHCP lease for
the print server exists.
● NO (default): The print server does
not request to renew the DHCP lease.
● YES: The print server requests to
renew the current DHCP lease.
Table C-2. EIO Graphical Control Panel Menu (2 of 5)
Menu Item Options Description of settings
EIOSG.book Page 41 Thursday, October 9, 2003 1:42 PM