HP SureStore CD-ROM Server/Tower User's Guide - 5967-2149

D-6 Regulatory and Safety Information
WARNING!
Lifting
Precautions
❏ HP J3277A SureStore CD-ROM Server/Tower 7 and
HP J3278A SureStore CD-ROM Server/Tower 7Plus
may weigh in excess of 20 kilograms or in excess of 40
pounds (see “Weight” on page C-1 in appendix C). Two
people are required to lift the tower.
Mounting
Precautions
When you put the tower into a rack, follow these mounting
precautions:
❏ Use only the HP C2982A CD-ROM Tower Rackmount Kit for
mounting hardware.
❏ The rack or cabinet should be adequately secured to prevent
it from becoming unstable and /or falling over. The tower
should be mounted in a position toward the bottom of the
rack for stability.
❏ Ensure that the server/tower does not overload the power
circuits, wiring, and over-current protection. To determine
the possibility of overloading the supply circuits, add
together the amperage ratings from the labels of all equip-
ment installed on the same circuits and compare the total
with the rating limits for the supply circuits.
❏ Make sure that the power source circuits are properly
grounded, then use the supplied power cord to connect the
server tower to the circuit. See the “Safety Considerations”
statements on page 2 (the page following the title page in
this guide).
If your installation requires a different power cord than the
one supplied with the server tower, be sure to use a power
cord displaying the mark of the safety agency that defines
the regulations for power cords in your country. The mark is
your assurance that the power cord can be used safely with
the tower server.
❏ Do not install the tower in an environment where the oper-
ating ambient temperature might exceed 40°C (104°F).
❏ Do not block airflow around the back of the unit.