343434-001.book Page i Tuesday, September 9, 2003 12:56 PM User’s Guide hp iPAQ Pocket PC h4000 Series Document Part Number: 343434-001 August 2003 Note: Not all models described are available in all regions.
343434-001.book Page ii Tuesday, September 9, 2003 12:56 PM © 2003 Hewlett-Packard Company © 2003 Hewlett-Packard Development Company, L.P. HP, Hewlett Packard, and the Hewlett-Packard logo are trademarks of Hewlett-Packard Company in the U.S. and other countries. iPAQ is a trademark of Hewlett-Packard Development Company, L.P. in the U.S. and other countries. Microsoft, Windows, the Windows logo, Outlook, and ActiveSync are trademarks of Microsoft Corporation in the U.S. and other countries.
43434-001.book Page iii Tuesday, September 9, 2003 12:56 PM Contents 1 Getting to Know Your iPAQ Pocket PC Using the Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4 Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . 1–5 Setting the Time for Home and Locations You Are Visiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5 Setting the Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6 Entering Owner Information . . . . . . . . .
343434-001.book Page iv Tuesday, September 9, 2003 12:56 PM Contents 3 Managing the Battery Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1 Installing the Battery in the h4100 Model . . . . . . . . . 3–2 Installing the Battery in the h4300 Model . . . . . . . . . 3–5 Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–8 Removing the Battery from the h4100 Model. . . . . . 3–8 Removing the Battery from the h4300 Model. . . . . .
343434-001.book Page v Tuesday, September 9, 2003 12:56 PM Contents 5 Learning Input Methods Using Input Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1 Changing Word Suggestion Options . . . . . . . . . . . . . 5–1 Using the On-Screen Keyboard. . . . . . . . . . . . . . . . . 5–4 Writing with the Stylus and the Letter Recognizer . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–5 Writing with the Stylus and Microsoft Transcriber . . . . .
343434-001.book Page vi Tuesday, September 9, 2003 12:56 PM Contents 8 Using Bluetooth Getting Acquainted with Bluetooth . . . . . . . . . . . . . . . . . 8–2 Understanding Terms . . . . . . . . . . . . . . . . . . . . . . . . 8–3 Supported Services . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4 Working with Bluetooth Settings. . . . . . . . . . . . . . . . . . . 8–4 Opening Bluetooth Settings. . . . . . . . . . . . . . . . . . . . 8–5 Setting Accessibility Properties. . . . . . . . . . . . . . .
343434-001.book Page vii Tuesday, September 9, 2003 12:56 PM Contents 9 Using the Wireless LAN Getting Acquainted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–1 Learning the Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2 Getting Started with the Wireless LAN . . . . . . . . . . . . . . 9–3 Powering the WLAN On or Off . . . . . . . . . . . . . . . . 9–3 Automatically Connecting to a Network . . . . . . . . . . 9–4 Manually Entering New Network Settings . . . . . . . .
343434-001.book Page viii Tuesday, September 9, 2003 12:56 PM Contents A Regulatory Notices Federal Communications Commission Notice. . . . . . . . . A–1 Declaration of Conformity for products marked with the FCC logo—United States only . . . . . . . . . . A–2 Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3 Avis Canadien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3 Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 1 Getting to Know Your iPAQ Pocket PC Congratulations on purchasing an HP iPAQ Pocket PC h4000 Series. Use this guide to find out about setting up your Pocket PC and to learn about how it works. The software programs described below are preinstalled on your iPAQ Pocket PC. These preinstalled programs are not deleted if your Pocket PC loses power. You can find detailed information for using these programs in the Help files on your iPAQ Pocket PC.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC hp iPAQ Software Functions Asset Viewer List detailed information about your system and its configuration. Bluetooth Enables short-range wireless communications technology capable of exchanging information up to a distance of about 30 feet (10 meters). hp Mobile Print Center Enable printing. (On CD for all models.) iPAQ Wireless Allows you to turn Wireless LAN and/or Bluetooth on and off.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC Microsoft Pocket PC Software Functions ActiveSync Synchronize the information between your Pocket PC and computer so you have the latest information in both locations. Be sure you install ActiveSync on your computer before connecting the cradle and iPAQ Pocket PC to your computer. Calculator Perform calculations and convert currency.
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC Microsoft Pocket PC Software Functions Pocket Internet Explorer Browse the Internet and download pages through synchronization or by connecting to the Internet. Pocket Word Create new documents or view and edit Word documents created on your computer. Settings Obtain quick access to settings for the backlight, clock, memory, power, regional settings, Today screen, password, sounds and notifications, etc.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC You can perform three basic actions using the stylus: Tap—Lightly touch the screen to select or open an item. Lift the stylus after you tap an item. Tapping is equivalent to clicking an item with the mouse on your computer. Drag—Place the point of the stylus on the screen and drag an item across the screen without lifting the stylus until you have completed the selection.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC 3. Tap the hour, minutes, or seconds, and use the up and down arrows to adjust the time. Shortcut: You can also adjust the time by moving the hands of the clock with the stylus. 4. Tap AM or PM. 5. Tap OK. 6. Tap Yes to save the time. Setting the Date 1. From the Start menu, tap Settings > System tab > Clock icon. Shortcut: From the Today screen, tap the Clock icon to set the date. 2.
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC Entering Owner Information You can personalize your iPAQ Pocket PC by entering owner information. To enter owner information: 1. From the Today screen, tap Start > Settings > Owner Information. Shortcut: From the Today screen, tap Tap here to set owner information. 2. Tap in the Name field. A keyboard appears at the bottom of the screen. Tap on the characters to enter your name.
343434-001.book Page 8 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC To perform a normal reset: 1. Locate the recessed Reset button on the side (h4100) or bottom (h4300) of your iPAQ Pocket PC. 2. Use the stylus to lightly press the Reset button. The Pocket PC restarts and displays the Today screen. Performing a Full Reset A full reset is sometimes referred to as a “hard reset.” Perform a full reset when you want to clear all settings, programs, and data from RAM.
343434-001.book Page 9 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC hp iPAQ Pocket PC h4300 series 3. Release the Power button first, then the Reset button. 4. The Pocket PC resets and powers on. Aligning the Screen When the iPAQ Pocket PC is turned on for the first time, you are guided through a screen alignment process. You must realign your screen if: ■ The Pocket PC does not respond accurately to your taps. ■ You perform a full reset of your Pocket PC.
343434-001.book Page 10 Tuesday, September 9, 2003 12:56 PM Getting to Know Your iPAQ Pocket PC 3. Tap the cross-hair object at each location. Be precise when tapping the cross-hair object. 4. Tap OK. Routine Care To keep your iPAQ Pocket PC in good condition and working properly, follow these guidelines: Ä ■ Keep your Pocket PC away from excessive moisture and temperature extremes. ■ Do not expose your Pocket PC to liquids or precipitation.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 2 Using ActiveSync You can use Microsoft ActiveSync to: Ä ■ Synchronize information between your iPAQ Pocket PC and up to two computers or one server so that you have the latest information in all locations. ■ Change synchronization settings and the synchronization schedule. ■ Copy files between your device and computer. ■ Install applications on your iPAQ Pocket PC. ■ Back up and restore device information. ■ Synchronize links.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Using ActiveSync Connecting to a Computer Connect your iPAQ Pocket PC to your computer using Microsoft ActiveSync and the desktop cradle, a wireless infrared connection, or Bluetooth. For more information on using ActiveSync with Bluetooth, refer to Chapter 8, “Using Bluetooth.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Using ActiveSync Synchronizing with Your Computer After you have installed ActiveSync, you can: ■ Create partnerships that enable you to synchronize information with up to two computers. ■ Select information to be synchronized with your iPAQ Pocket PC (for example, Contacts, Calendar, Inbox, Tasks, Favorites, Files, Notes, and AvantGo).
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Using ActiveSync 4. Initiate a connection by tapping Start > ActiveSync > Tools > Connect via IR. Synchronization begins on your device. 5. To disconnect, move the devices away from each other or tap X in the upper right of the screen to turn off. Changing Synchronization Settings You can modify your synchronization settings for Microsoft ActiveSync to: ■ Change when your iPAQ Pocket PC synchronizes with your computer or server.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Using ActiveSync 2. Tap OK when you are finished. 3. From the File menu, click Connection Settings. Select the type of connection to be allowed between the iPAQ Pocket PC and the computer. Copying Files You can copy files to and from your computer using Explore in ActiveSync and Windows Explorer. To copy files: 1. Insert your iPAQ Pocket PC into the desktop cradle. 2. From the Start menu on your computer, click Programs > Microsoft ActiveSync. 3.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Using ActiveSync Installing Programs To install programs on your iPAQ Pocket PC from your computer using ActiveSync: 1. Connect your iPAQ Pocket PC to your computer using the desktop cradle. 2. Follow the instructions provided with the program and by the installation wizard. 3. Check the screen of your iPAQ Pocket PC to see if any further steps are necessary to complete the program installation.
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Using ActiveSync Sending and Receiving E-mail You can send and receive e-mail messages by synchronizing your iPAQ Pocket PC with your computer using ActiveSync. If you are using ActiveSync to send and receive e-mail messages, the name of the folder you are using is displayed at the bottom of the screen. For more information on sending and receiving e-mail using ActiveSync, from the Start menu, tap Help > Inbox.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 3 Managing the Battery Installing the Battery The Pocket PC has a small internal backup battery that allows you to change the main battery without losing RAM data (user-installed programs and data) as long as it is replaced immediately. It is recommended that you fully charge the iPAQ Pocket PC battery before setting up the unit, and recharge regularly. Your Pocket PC uses some power to maintain files in RAM and the clock.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Managing the Battery Installing the Battery in the h4100 Model To install the removable/rechargeable battery in the HP iPAQ Pocket PC h4100 series: 1. On the back of the iPAQ Pocket PC, slide the Cover Release latch up 1 and pull the cover away from the unit 2.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Managing the Battery 2. Insert the battery into the battery slot on the right side of the Pocket PC 1, and push the left side of the battery into place 2 with the connectors lined up on the lower right. Note: Ensure the large battery label is visible when the battery is installed.
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Managing the Battery 3. Replace the cover by matching the tabs on the cover to the latches on the iPAQ Pocket PC, and snap into place. Ä CAUTION: The cover must be tightly latched in place for the iPAQ Pocket PC to operate. Note: If the battery is not fully charged, you must connect the AC Adapter to the Pocket PC to fully charge it before continuing. It takes about four hours to fully charge the battery.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Managing the Battery Installing the Battery in the h4300 Model To install the removable/rechargeable battery in the HP iPAQ Pocket PC h4300 series: 1. On the back of the iPAQ Pocket PC, hold down the Cover Release Button 1 as you slide the cover down and away from the unit 2.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Managing the Battery 2. Insert the battery into the battery slot on the right side of the Pocket PC 1, and push the left side of the battery into place 2 with the connectors lined up on the lower right. Note: Ensure the large battery label is visible when the battery is installed.
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Managing the Battery 3. Replace the cover by lining up the cover with the sides of the iPAQ Pocket PC and sliding the cover up until it snaps into place. Ä CAUTION: The cover must be tightly latched in place for the iPAQ Pocket PC to operate. Note: If the battery is not fully charged, you must connect the AC Adapter to the Pocket PC to fully charge it before continuing. It takes up to four hours to fully charge the battery.
343434-001.book Page 8 Tuesday, September 9, 2003 12:56 PM Managing the Battery Removing the Battery Removing the Battery from the h4100 Model To remove the battery from the iPAQ Pocket PC h4100 series: 1. Remove the stylus. 2. Remove the battery cover. 3. Place your thumb in the recess 1, then lift the left side of the battery 2 and pull it out 3.
3434-001.book Page 9 Tuesday, September 9, 2003 12:56 PM Managing the Battery Removing the Battery from the h4300 Model To remove the battery from the iPAQ Pocket PC h4300 series, remove the battery cover, place your thumb in the recess 1, then lift the left side of the battery 2 and pull it out 3.
343434-001.book Page 10 Tuesday, September 9, 2003 12:56 PM Managing the Battery Charging with the AC Adapter The standard AC Adapter works in any household outlet. You can also purchase one that works in your vehicle’s cigarette lighter or a 12-volt power outlet. Ä CAUTION: Use only HP recommended AC adapters. To charge the iPAQ Pocket PC using the AC Adapter: 1. Plug the AC Adapter into an electrical outlet 1. 2. Insert the AC Adapter plug into the charging adapter 2. 3.
343434-001.book Page 11 Tuesday, September 9, 2003 12:56 PM Managing the Battery Charging with the Desktop Cradle and AC Adapter Use the Desktop Cradle to: ■ Charge the iPAQ Pocket PC. ■ Synchronize the Pocket PC with your computer. (For information on synchronizing, refer to Chapter 2, “Using ActiveSync.”) To charge the iPAQ Pocket PC using the desktop cradle: 1. Plug the AC Adapter into an electrical outlet 1 and connect the other end of the AC Adapter to the AC connector on the desktop cradle 2. 2.
343434-001.book Page 12 Tuesday, September 9, 2003 12:56 PM Managing the Battery Charging a Spare Battery Battery Saving Tip: To ensure you always have battery power available, invest in an extra Standard Battery or Extended Battery. These batteries can be charged in the Desktop Cradle. To purchase an extra battery, refer to the HP Web site at www.hp.com/products/pocketpc. To charge an extra battery in the Desktop Cradle: 1.
343434-001.book Page 13 Tuesday, September 9, 2003 12:56 PM Managing the Battery Changing the Backlight Settings To change the backlight settings in order to conserve more battery power: 1. From the Start menu, tap Settings > System tab > Backlight. Shortcut: Press Application Button 4 (iTask), then tap the Light bulb icon. 2.
343434-001.book Page 14 Tuesday, September 9, 2003 12:56 PM Managing the Battery ■ Extended—Uses the least battery power while maintaining a WLAN connection. This mode significantly reduces the WLAN data throughput. It is not recommended for large file transfers. Note: The Extended power saving mode is not recommended if Bluetooth is also on. Disabling the Application Buttons Pressing the Application Buttons on your iPAQ Pocket PC will turn your device on by default.
343434-001.book Page 15 Tuesday, September 9, 2003 12:56 PM Managing the Battery Manually Monitoring the Battery To manually monitor the battery power: 1. From the Start menu, tap Settings > System tab > Power icon. 2. Tap OK. Battery Saving Tip: Tap Start > Settings > System tab > Power > Control tab, then tap the On battery power checkbox and set it to turn your iPAQ Pocket PC off after a short time of not being used.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 4 Learning the Basics Using the Today Screen When you first turn on your iPAQ Pocket PC, the Today screen displays. You can also display it by tapping Start, and Today. Use the Today screen to view: ■ Owner information ■ Upcoming appointments ■ Unread and unsent messages ■ Tasks that need to be completed Tap to switch to a program. Tap to set ISP or Work connections. Tap to change volume or mute all sounds. Tap to change date and time.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Learning the Basics Navigation Bar and Command Bar The Navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to close screens. Use the Start menu to select a program. Tap to select a program you used recently. Tap to select a program. Tap to see additional programs. Tap to customize the settings. Tap to view online Help. Tap for Bluetooth features.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Learning the Basics Status Icons You may see the following status icons displayed on the Navigation bar or Command bar. Tap the icon on the screen to view more information related to the item. Active connection to computer or wireless network. Inactive connection to computer or wireless network. Microsoft ActiveSync is synchronizing. Speaker is on. Speaker is off. iPAQ Pocket PC is connected with the desktop cradle.
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Learning the Basics Tap and hold to display the pop-up menu. Tap the action you want. Tap outside the menu to close it without performing an action. Creating information From the Today screen, you can create new information, including: ■ Appointments ■ Contacts ■ Messages ■ Excel Workbook ■ Notes ■ Tasks ■ Word documents 1. Tap , or from the Start menu, tap Today > New. 2. Tap an option to create a new item. 3.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Learning the Basics Customizing the Today Screen From the Settings Today screen, you can: ■ Add a picture as the background. ■ Select the information that appears on the Today screen. ■ Set the order of the information. ■ Set when to see the Today screen. 1. Tap , or from the Start menu, tap Settings > Today. 2. Select Use this picture as the background checkbox. 3. Tap Browse to select a picture from File Explorer.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Learning the Basics 4. Tap the Items tab to select or reorder the information on the Today screen. 5. Tap an item to highlight it. 6. Tap Move Up or Move Down to change the order of items on the Today screen. Note: You cannot change the placement of the Date on the Today screen. 7. Tap the down arrow associated with Display Today screen if device is not used for...
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Learning the Basics Using Applications Opening Applications Open any application on your iPAQ Pocket PC from the Start menu. Note: You can also open an application by assigning it to an Application Button. To assign Application Buttons, from the Today screen, tap Start > Settings > Buttons. To open an application: 1. Tap Start > Programs. 2. Tap the desired application title or logo.
343434-001.book Page 8 Tuesday, September 9, 2003 12:56 PM Learning the Basics Closing Manually 1. From the Start menu, tap Settings > System tab > Memory > Running Programs tab. 2. Tap Stop All or select a particular application, then tap Stop. Note: To bring a currently running program to the foreground, tap Activate. Installing Applications Install applications on your iPAQ Pocket PC from your: ■ Computer by using Microsoft ActiveSync. ■ iPAQ Pocket PC if the application file has a .cab extension.
343434-001.book Page 9 Tuesday, September 9, 2003 12:56 PM Learning the Basics Using iPAQ Image Zone Using iPAQ Image Zone, you can: ■ View pictures stored on your iPAQ Pocket PC or on a storage card ■ Record sounds with pictures ■ View a slideshow ■ Print pictures Viewing Pictures 1. From the Start menu, tap Programs > iPAQ Image Zone. Note: The viewer opens in Browse mode by default. Browse mode displays thumbnail view of the pictures in the current folder. 2.
343434-001.book Page 10 Tuesday, September 9, 2003 12:56 PM Learning the Basics Recording Sound With a Picture You can record sound for each picture. When the picture is displayed, the associated sound is played. Pictures with sound have a speaker icon in their thumbnails. To add sound to a picture: 1. Select the picture by tapping on its thumbnail. 2. Tap the Cassette icon on the menu bar. 3. Tap the Record button on the Recording toolbar. 4. Speak into the microphone or record the sound. 5.
343434-001.book Page 11 Tuesday, September 9, 2003 12:56 PM Learning the Basics To change slideshow settings: 1. Tap File > Options > Slideshow tab. 2. Select the settings and effects you want to use in your slideshow. 3. Tap OK. Printing Pictures You can print pictures from iPAQ Image Zone if HP Mobile Printing has been installed from the Companion CD. To print a picture: 1. Select the picture to be printed by tapping on its thumbnail. 2. Tap File > Print.
343434-001.book Page 12 Tuesday, September 9, 2003 12:56 PM Learning the Basics Backup/Restore using iPAQ Backup iPAQ Backup saves your data in a backup file. You may designate a file name and a location for the file to be saved. iPAQ Backup backs up to a memory card, main memory, or the iPAQ File Store folder. Close all programs on your iPAQ Pocket PC before backing up or restoring your information.
343434-001.book Page 13 Tuesday, September 9, 2003 12:56 PM Learning the Basics Using iPAQ File Store Folder You can install programs and save files to the iPAQ File Store folder, which is accessed from File Explorer on your iPAQ Pocket PC. Programs and files stored in iPAQ File Store are held in ROM and are saved if you perform a full reset of your iPAQ Pocket PC or if the battery discharges completely. To save to iPAQ File Store: 1. Copy the files to be saved to the iPAQ File Store folder. 2.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 5 Learning Input Methods Using Input Software Ä CAUTION: To avoid damaging your iPAQ Pocket PC screen, always use a stylus. Never use a pen or any type of metal pointer on the screen. To input information to your Pocket PC, you can tap the on-screen keyboard or write with the Letter Recognizer, Microsoft Transcriber, or Block Recognizer in any application.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Learning Input Methods To change settings for word suggestions: 1. From the Start menu, tap Settings > Input. 2. Tap the Word Completion tab. 3. Tap the down arrow associated with letters and select the number of letters you want to type before a word is suggested.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Learning Input Methods 4. Tap the down arrow associated with words and select the number of words you want suggested. 5. Tap OK. Note: If you do not want any words suggested, remove the checkmark by tapping the checkbox next to Suggest Words When Entering Text.
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Using the On-Screen Keyboard Use the stylus to tap letters, numbers, and symbols on the on-screen keyboard to enter typed text directly onto the screen. 1. From any application, tap the up arrow next to the Input Panel icon. 2. Tap Keyboard to display a keyboard on the screen. Note: To see symbols, tap the 123 or Shift key. 3. Tap a letter, symbol, or number to enter information. 4. Tap OK.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Writing with the Stylus and the Letter Recognizer Use the stylus and Letter Recognizer to write letters, numbers, and symbols on the screen. Create words and sentences by writing in uppercase (ABC), lowercase (abc), and symbols (123) as instructed here. To write with the stylus and Letter Recognizer: 1. From any application, tap the up arrow next to the Input Panel icon. 2. Tap Letter Recognizer. 3.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Writing with the Stylus and Microsoft Transcriber Use the stylus and Microsoft Transcriber to write words, letters, numbers, and symbols anywhere on the screen. 1. From any application, tap the up arrow next to the Input Panel icon. 2. Tap Transcriber to display the Transcriber Intro screen. 3. Tap OK. 4. Tap New at the bottom of the screen. 5. Begin writing on the screen. What you write will be converted to text.
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Learning Input Methods 3. Write a word, letter, or symbol between the hatch marks. a. To type text, write a letter between the hatch marks labeled “abc.” b. To type numbers or symbols, write a number or symbol between the hatch marks labeled “123.” What you write will be converted to text.
343434-001.book Page 8 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Converting Writing to Text You can convert your writing to text when you write with the stylus in the Notes program or from the Notes tab in: ■ Calendar ■ Contacts ■ Tasks To convert writing to text: 1. From the Start menu, tap Notes or tap the Notes tab in Calendar, Contacts, or Tasks. 2. Tap a note to open it. 3. Tap Tools. 4. Tap Recognize.
343434-001.book Page 9 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Configuring the Keyboard You can configure several features on the integrated keyboard. To customize your keyboard: 1. On your iPAQ Pocket PC, tap Start > Settings > System tab > Keyboard. 2. Do one or more of the following: ■ Tap the Disable Keyboard checkbox to disable the keyboard functionality. ■ Tap the Turn on keyboard backlight checkbox to turn the Pocket PC backlight on whenever you press a key on the keyboard.
343434-001.book Page 10 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Special Key Features The integrated keyboard takes advantage of several special features to make using a small keyboard easier. “Sticky” Keys The integrated keyboard uses a “Sticky Key” feature for the Shift, Menu, and Fn keys (known as “key modifiers”). This means that when you enter a number or symbol requiring a combination of keys to be pressed, the key modifier will stay engaged until you press the second key.
343434-001.book Page 11 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Note: To type a backslash (\) on the integrated keyboard, first press Fn + P to create a forward slash (/), then the Symbol key to modify it as necessary. Refer to the “Symbol Key” section below for more information on modifying characters. Symbol Key To add a special character using the Symbol key, type the related character first, then press the Symbol key.
343434-001.
343434-001.book Page 13 Tuesday, September 9, 2003 12:56 PM Learning Input Methods / \\ || “ '«» ( [{<« ) ]}>» + ±&-_ ! ¡?¿ [space] .
343434-001.book Page 14 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Function Keys The integrated keyboard keys perform additional functions when pressed in the combinations indicated.
343434-001.book Page 15 Tuesday, September 9, 2003 12:56 PM Learning Input Methods Menu Key Functions The Menu key is application- and context-sensitive. It pulls up a menu specific to what you are doing. Not all applications support functions for the Menu key. The following table shows some examples of how Pocket Word use the Menu key when text is selected. Different menu options are shown if no text is selected.
343434-001.
343434-001.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 6 Expansion Cards You can expand the memory and connectivity of your iPAQ Pocket PC. Use optional expansion cards for: ■ Adding functionality such as a an SDIO camera ■ Expanding the memory of your iPAQ Pocket PC ■ Viewing the content of memory cards (SD/MMC) Note: Expansion cards must be purchased separately and are not included with your iPAQ Pocket PC. To locate information about expansion cards, visit the following HP Web site: www.hp.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Expansion Cards Installing a Secure Digital (SD) Expansion Card To install a Secure Digital (SD) card into the expansion slot on the iPAQ Pocket PC: 1. Locate the slot on the top of the iPAQ Pocket PC. 2. Remove the protective plastic card. 3. Insert the expansion card into the expansion slot and push the connection edge of the card firmly into the expansion slot.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Expansion Cards Removing a Secure Digital (SD) Expansion Card To remove a Secure Digital (SD) expansion card from the expansion slot on the iPAQ Pocket PC: 1. Close all applications that are using the expansion card. 2. Remove a card from the Secure Digital expansion slot by slightly pushing down on the card 1 to unlock it. 3. When the card disengages and pops up 2, pull it from the expansion slot.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 7 Connecting to the Internet Use your iPAQ Pocket PC to connect to the Internet or your Work network. To send and receive e-mail with Inbox and to view Web sites with Pocket Internet Explorer, you must set up a remote connection with devices such as a Secure Digital Input/Output (SDIO) modem card, ethernet card, or the wireless 802.11b internal radio. Another option is to use a Bluetooth-enabled device such as a phone or LAN Access point.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Connecting to the Internet Connecting to a Private Network 1. Before you start, be sure to have your server phone number, user name, and password. This information can be obtained from your network administrator. 2. Tap Start > Settings > Connections tab > Connections icon. 3. In My Work Network, follow the instructions for each type of connection. For more information on Bluetooth connections, see Chapter 8, “Using Bluetooth.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Connecting to the Internet Using a Favorites List With Pocket Internet Explorer and a connection to the Internet, you can view Web sites on your iPAQ Pocket PC by selecting one from your Favorites list. To select a Web site from your Favorites list: 1. From the Start menu, tap Internet Explorer. 2. Tap the Favorites icon and the Web site you want to view.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 8 Using Bluetooth Your iPAQ Pocket PC comes with built-in Bluetooth technology that allows short-range connections and provides fast, reliable, and secure wireless communication.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Using Bluetooth ■ Create a personal area network (PAN) to chat, play games, etc. Note: Use of dial-up and wireless Internet, e-mail, corporate networks, and other wireless communications, such as Bluetooth-enabled devices, may require separately purchased additional hardware and other compatible equipment, in addition to a standard Wireless LAN (WLAN) infrastructure and a separately purchased service contract.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Understanding Terms The following Bluetooth terms are used throughout this chapter. The Term... Means... Authentication Verification of a numeric passkey before a connection or activity can be completed. Authorization Approval of a connection or activity before it can be completed. Bonding (Paired devices) Create a trusted connection between your device and another. After a bond is created, the two devices become paired.
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Supported Services The functions that Bluetooth supports are called services.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Using Bluetooth ■ Select a user profile ■ View software and port information Use the arrows to the right to scroll through the tabs. Opening Bluetooth Settings 1. From the Today screen, tap the Bluetooth icon. 2. From the pop-up menu, tap Bluetooth Settings. Turning On Bluetooth To turn on Bluetooth from Bluetooth Settings: 1. From the Today screen, tap the Bluetooth icon. 2. From the pop-up menu, tap Bluetooth Settings. 3.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Tap the Turn off button to disable. When Bluetooth is turned off, the Bluetooth icon is grayed with a red X, and no incoming or outgoing connections are possible. Battery Saving Tip: Turn Bluetooth off when you are not using it. Setting Accessibility Properties You can enter or change accessibility properties to define how your iPAQ Pocket PC interacts with other Bluetooth devices.
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Allowing Paired Devices to Connect Paired devices share and exchange an internally generated Link Key before connecting. The Link Key is derived from a unique Bluetooth device address, a random number, and a user-defined passkey. This feature allows only devices that you trust to connect to your iPAQ Pocket PC. To allow paired devices to connect: 1.
343434-001.book Page 8 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Enabling Bluetooth Services You can select to enable certain services: ■ Automatically when Bluetooth is activated ■ When you permit the connection ■ When a passkey or link key is correctly entered You can use any of these security options when transferring files, creating a serial port connection, exchanging business card information, configuring dial-up networking, and joining a personal network.
343434-001.book Page 9 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Requiring Authorization to Access Services If you elect to require authorization to access services, you must authorize each connection. Then, your iPAQ Pocket PC will always ask you if the connection should be permitted. To require authorization to access services: 1. From the Today screen, tap the Bluetooth icon > Bluetooth Settings. 2.
343434-001.book Page 10 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Setting a Shared Folder You can determine the folder that other devices access when they connect to your iPAQ Pocket PC. To select a shared folder: 1. From the Today screen, tap the Bluetooth icon > Bluetooth Settings. 2. Tap the File Transfer tab. 3. Tap the Folder icon and locate a desired file folder. 4. Tap OK.
343434-001.book Page 11 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Understanding Profiles Use profiles to quickly enable selected personal settings in multiple environments. Creating a Profile To create a profile: 1. From the Today screen, tap the Bluetooth icon > Bluetooth Settings > General tab > Profile icon. 2. Tap the New button. 3. Enter a descriptive name. 4. Select an existing profile to use as a template. 5. Tap OK.
343434-001.book Page 12 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Activating a Profile When a new profile is created, you will need to activate it. To activate a profile after creating it: 1. From the Today screen, tap the Bluetooth icon > Bluetooth Settings. 2. From the General tab, select it from the Current Profile down arrow list. 3. Tap OK.
343434-001.book Page 13 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Renaming a Profile 1. From the Today screen, tap the Bluetooth icon > Bluetooth Settings. 2. From the General tab, tap the Profile icon. 3. Select a profile from the Add/Delete Profiles list. 4. Tap the Rename button. 5. Enter a new descriptive name. 6. Tap Enter. 7. Tap OK. Deleting a Profile 1. From the Today screen, tap the Bluetooth icon > Bluetooth Settings. 2. From the General tab, tap the Profile icon. 3.
343434-001.book Page 14 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Opening Bluetooth Manager From the Today screen, tap the Bluetooth icon > Bluetooth Manager. The first screen that displays is My Shortcuts. Note: Opening Bluetooth Manager automatically turns on Bluetooth. Locating and Selecting a Device Several tasks require you to locate a device and connect to it.
343434-001.book Page 15 Tuesday, September 9, 2003 12:56 PM Using Bluetooth 7. Tap OK. 8. Enter the same passkey into the other device. Note: Some devices, such as mobile phones, need to be placed in a mode to accept a bond from another device. Refer to that device’s user instructions for more information. Unpairing Devices You can remove a paired relationship between devices. 1. From the Today screen, tap Start > Bluetooth Manager. 2. Tap Tools > Paired devices. 3. Tap a device name. 4. Tap Remove. 5.
343434-001.book Page 16 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Connecting to Other Devices Use ActiveSync, serial and dial-up connections to communicate with other Bluetooth devices. Establish a partnership with a cell phone and set up the Bluetooth services it offers. Identifying the Communications Port You can identify the virtual COM ports used to create a serial port connection. You may need to identify these COM ports for activities such as printing.
343434-001.book Page 17 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Using the HP Bluetooth Multiport Module for Evo Notebooks and Desktops 1. Remove your iPAQ Pocket PC from the USB Synchronization Cradle. 2. Turn on Bluetooth on both the iPAQ Pocket PC and the Evo computer. 3. Right click the Bluetooth icon in the system tray on your computer, then click Advanced Configuration. 4. Select the Client Applications tab, then write down the COM port number listed next to Bluetooth Serial Port. 5.
343434-001.book Page 18 Tuesday, September 9, 2003 12:56 PM Using Bluetooth 8. Remove the checkmark from the Secure Connection box, then select the COM port that is the same as the one you wrote down earlier. Click Apply > OK > OK. 9. Open ActiveSync on your computer, then click File > Connection Settings. 10. Check the Allow Serial Cable or Infrared Connection to this COM Port box. 11. Select the COM port that is the same as the one you wrote down earlier, then click OK.
343434-001.book Page 19 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Setting Up an ActiveSync Partnership on Your iPAQ Pocket PC To establish an ActiveSync connection: 1. From the Today screen, tap Bluetooth icon > Bluetooth Manager. 2. Tap New > ActiveSync via Bluetooth > Next. 3. Follow the connection wizard instructions. Note: Be sure the ActiveSync COM port setting on your computer is the same as the COM port setting used for Bluetooth on your computer. 4.
343434-001.book Page 20 Tuesday, September 9, 2003 12:56 PM Using Bluetooth 5. Under Serial Port Selection, select the name of the serial port for the computer selected above, then tap Next > Finish. Note: If you are setting up the ActiveSync partnership with an Evo Notebook or Desktop computer, select the name you typed in Step 7 of “Using the HP Bluetooth Multiport Module for Evo Notebooks and Desktops.” .
343434-001.book Page 21 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Dial-Up Networking When you use dial-up networking (DUN), the remote device providing the dial-up networking service and the remote computer to which you are connecting must both have telephone access. Devices that can provide dial-up networking include Bluetooth: ■ Mobile phones ■ Desktop computers ■ Modems Using Dial-Up Networking To connect to a device that provides modem access: 1.
343434-001.book Page 22 Tuesday, September 9, 2003 12:56 PM Using Bluetooth To connect to the Internet and use Pocket Internet Explorer, you must first connect to a Bluetooth phone from Bluetooth Manager. To make this connection the default dial-up connection for Pocket Internet Explorer: 1. From the Today screen, tap Start > Settings > Connections tab. 2. Tap the Connections icon > Advanced tab. 3. Tap Select Networks. 4. Enable Bluetooth Settings from the dropdown list.
343434-001.book Page 23 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Working with Files You can exchange information with a connected device and use the Bluetooth File Explorer to: ■ Navigate through the directories. ■ View files and folders. ■ Create new folders. ■ Send and receive files from a remote device. ■ Delete and rename files on a remote device. Creating a File Transfer Connection 1. From the Today screen, tap Start > Bluetooth Manager. 2.
343434-001.book Page 24 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Receiving a File from a Remote Device 1. Tap and hold a file transfer shortcut icon, and tap Connect. 2. Navigate to the file location on the remote device. 3. Tap the file. 4. Tap File > Get. 5. Tap OK. Deleting a File from a Remote Device 1. Tap and hold a file transfer shortcut icon, and tap Connect. 2. Navigate to the file location on the remote device. 3. Tap the file. 4. Tap File > Delete. 5.
343434-001.book Page 25 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Setting Up Your Business Card Information To set up your business card information: 1. Create a contact in the Contacts program that includes your name, title, and other relevant information. 2. From the Today screen, tap the Bluetooth icon > Bluetooth Settings. 3. Tap the Information Exchange tab. 4. Tap the My business card (vCard) icon. 5. Choose your contact from the list. 6. Tap OK.
343434-001.book Page 26 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Sending Business Cards 1. From the Today screen, tap the Bluetooth icon > Bluetooth Manager. 2. Tap Tools > Business Card Exchange. 3. Tap the Send icon. 4. Tap the device where you want to send your business card. 5. Tap OK. Requesting Business Cards 1. From the Today screen, tap the Bluetooth icon > Bluetooth Manager. 2. Tap Tools > Business Card Exchange. 3. Tap the Request icon. 4.
343434-001.book Page 27 Tuesday, September 9, 2003 12:56 PM Using Bluetooth Exchanging Business Cards You can exchange business card information with another device. If available, the device’s information will be sent directly into your Contacts list in Pocket Outlook. To exchange business cards: 1. From the Today screen, tap the Bluetooth icon > Bluetooth Manager. 2. Tap Tools > Business Card Exchange. 3. Tap the Exchange icon. 4. Tap the device with which you want to exchange your business card. 5.
343434-001.book Page 28 Tuesday, September 9, 2003 12:56 PM Using Bluetooth To view the connection status: 1. From the Today screen, tap the Bluetooth icon > Bluetooth Manager. 2. Tap and hold an active connection icon or list name, and tap Status. 3. Tap OK. Closing a Connection 1. From the Today screen, tap the Bluetooth icon > Bluetooth Manager. 2. Tap and hold the connection icon or list name. 3. Tap Disconnect from the menu. 4. Tap OK. Viewing Connection Information 1.
343434-001.book Page 29 Tuesday, September 9, 2003 12:56 PM Using Bluetooth To create a shortcut: 1. From the Today screen, tap the Bluetooth icon > Bluetooth Manager. 2. Tap New, then a type of service, and tap Next. 3. Follow the connection wizard instructions. Note: Paired devices are designated by a checkmark. Deleting a Shortcut 1. From the Today screen, tap the Bluetooth icon > Bluetooth Manager. 2. Tap and hold the connection icon or list name to be deleted. 3. Tap Delete from the menu. 4.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 9 Using the Wireless LAN Getting Acquainted Your iPAQ Pocket PC can connect to an 802.11b Wireless LAN (WLAN) or connect directly to other WLAN-enabled devices.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Learning the Terms It is recommended that you become familiar with the following terms as you begin to use WLAN technology. Term Definition Wireless Access Point The access point provides a wireless connection to a network (additional hardware). Infrastructure This connection mode uses wireless access points to connect to networks. Device-to-computer or ad-hoc This mode does not use access points.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Getting Started with the Wireless LAN Powering the WLAN On or Off To use WLAN on your iPAQ Pocket PC, you need to turn on WLAN and set up your device. To turn the WLAN on or off: 1. From the Today screen, tap Start > iPAQ Wireless. 2. Tap the WLAN icon.
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Battery Saving Tip: Turn WLAN off when you are not using it. When WLAN is on, be sure one of the WLAN power saving modes is selected. Refer to “Changing the Wireless LAN Power Saving Modes” in Chapter 3, “Managing the Battery” for more information. Note: Some Access Points and networks do not support one or more of the power saving modes that are available.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Manually Entering New Network Settings A wireless network can be added either when the network is detected (the Network Indicator icon is showing in the Navigation bar) or manually by entering setting information. To manually add a wireless network: 1. Be sure the WLAN is powered on. 2. Tap the Connections icon ( or ) > Settings > Advanced tab > Network Card button > Wireless tab > Add New Settings. 3.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN c. If a network key is provided by your network automatically, tap the The Key is provided for me automatically checkbox. d. For increased security, tap the Enable network access using IEEE 802.1X checkbox. You should only check this option if it is supported by your network environment. Ask your network administrator if you are unsure.
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Managing Wireless Network Settings Viewing or Editing a Wireless Network To view or edit an existing or available wireless network: 1. Be sure the WLAN is powered on. 2. Tap the Connections icon > Settings > Advanced tab > Network Card button > Wireless tab. 3. In the Wireless networks box, tap the desired network name. 4. Edit the existing settings as necessary, then tap OK to save the changes.
343434-001.book Page 8 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Monitoring Signal Strength and Status To view the signal strength between your iPAQ Pocket PC and access point WLAN connection: 1. Tap the Connections icon ( or ) in the Navigation bar. 2. When the Connectivity box displays, you will be able to view the type of network the iPAQ Pocket PC is connected to (for example, Work or Internet) and an icon displaying the signal strength.
343434-001.book Page 9 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Working with Network Settings Looking Up an IP Address To find the IP address the wireless network is using: 1. Be sure the WLAN is powered on. 2. Connect to the appropriate network. 3. Tap the Connections icon > Settings > Advanced tab > Network Card button > Network Adapters tab. 4. Tap the appropriate adapter to modify the settings. The IP address appears in the IP Address box.
343434-001.book Page 10 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Changing TCP/IP Settings Note: Most Internet Service Providers (ISPs) and private networks now use dynamically-assigned IP addresses. You will not need to change TCP/IP settings unless your ISP or private network does not use dynamically-assigned IP addresses. If you are not sure, check with your network administrator. To change TCP/IP Settings: 1.
343434-001.book Page 11 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Changing DNS and WINS Settings Note: Most Internet Service Providers (ISPs) and private networks now use dynamically-assigned IP addresses. You will not need to change DNS and WINS settings unless your ISP or private network does not use dynamically-assigned IP addresses. If you are not sure, check with your network administrator.
343434-001.book Page 12 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN 6. Tap the Name Servers tab and enter the requested information. 7. Tap OK to save your settings. Setting Up VPN Server Connections A VPN connection enables you to securely connect to servers, such as a corporate network, via the Internet. To set up a VPN server connection: 1. Contact your network administrator for your user name, password, domain name, TCP/IP settings, and host name or IP address of the VPN server. 2.
343434-001.book Page 13 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN 6. In the Host name/IP box, enter the VPN server name or IP address. 7. Next to VPN type, tap the type of authentication to use with your device (IPSec/L2TP or PPTP). If you aren’t sure which option to choose, ask your network administrator. 8. Tap Next. 9. If you selected IPSec/L2TP on the previous screen, tap the type of authentication.
343434-001.book Page 14 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN Starting VPN Server Connections To start a connection through a VPN server, be sure the WLAN is powered on, then select the VPN network. Your iPAQ Pocket PC will automatically begin connecting. Setting Up Proxy Server Settings If you are connected to your ISP or private network during synchronization, your iPAQ Pocket PC should download proper proxy settings from your computer.
343434-001.book Page 15 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN WLAN Security Protocol Utilities Your HP iPAQ Pocket PC supports the IEEE 802.1X standard for wireless encryption for customers whose network supports this feature. Contact your company’s IT Administrator to set up the following features. 802.1X Certificate Enroller This utility allows you to request a user certificate from a certificate server.
343434-001.book Page 16 Tuesday, September 9, 2003 12:56 PM Using the Wireless LAN LEAP Registration Utility Cisco LEAP is an 802.1X authentication protocol that uses a username and password pair to authenticate access by a wireless client to a wireless router. Use of the LEAP registration utility is required to log on to a LEAP-authenticated network. Most of the other types of secure networks are set up automatically by the iPAQ WLAN connection software.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM 10 Troubleshooting Use the following suggestions to troubleshoot problems with the iPAQ Pocket PC. Common Problems Problem I cannot see anything on the screen. Solution ■ Be sure the iPAQ Pocket PC is powered on. ■ Be sure the iPAQ Pocket PC is connected to the AC Adapter and the Desktop Cradle. ■ Reset the device by using the stylus to lightly press the Reset button. ■ Remove and replace the battery. I cannot keep my battery charged.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Troubleshooting Problem I want to travel with my iPAQ Pocket PC. Solution ■ Back up your information. ■ Take a copy of your backup with you on a SD memory card. ■ Disconnect all external devices. ■ Take the AC Adapter and Charger Adapter with you. ■ Keep your iPAQ Pocket PC in a protective case and keep it in your carry-on luggage. I want to travel internationally with my iPAQ Pocket PC.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Troubleshooting Problem I cannot connect to a network. Solution ■ Be sure you have added the necessary server information. ■ Be sure the network you are attempting to connect to is not busy. ■ If you are using an SDIO Ethernet card, be sure the proper drivers for your card are installed. ■ Be sure your user name and password are correct. ■ Tap Start > Settings > Connections tab > Connections and check your connection settings.
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Troubleshooting Problem Solution I cannot find the document or workbook I saved. Pocket Word and Excel recognize and display documents in only one folder below My Documents. For example, if you created another folder in the Personal folder in My Documents, the documents in that folder will not be shown. To find your document or workbook, from tap Start > Programs > File Explorer.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Troubleshooting ActiveSync For more information on Microsoft ActiveSync, refer to Chapter 2, “Using ActiveSync.” Problem I cannot connect to my computer using the Desktop Cradle. Solution ■ Be sure you have installed Microsoft ActiveSync 3.7 or higher on your host computer before connecting your iPAQ Pocket PC to it. ■ Be sure your iPAQ Pocket PC is connected to the Desktop Cradle, and that the cradle is connected to your computer.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Troubleshooting Problem Microsoft ActiveSync cannot locate my iPAQ Pocket PC when I synchronize. Solution ■ Be sure the device is on. ■ Be sure all cables are securely connected. ■ Remove your iPAQ Pocket PC from the Universal Desktop Cradle or disconnect it from the Autosync Cable, power on the unit by pressing the Power button, then put it back in the synchronization cradle or connect it to the cable.
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Troubleshooting Expansion Cards For more information on expansion cards, refer to Chapter 6, “Expansion Cards.” Problem I cannot get my iPAQ Pocket PC to recognize the expansion card. Solution ■ Be sure you have firmly pushed the expansion card down into the iPAQ Pocket PC. ■ Be sure you have inserted the appropriate card into the appropriate slot. ■ Be sure any third party drivers are installed. I cannot insert my card.
343434-001.book Page 8 Tuesday, September 9, 2003 12:56 PM Troubleshooting Bluetooth For more information on Bluetooth, refer to Chapter 8, “Using Bluetooth.” Problem Solution ■ ■ ■ ■ Be sure Bluetooth is turned on. I can see other devices, but I cannot connect or exchange data with them. ■ ■ ■ ■ Be sure Bluetooth is turned on. Other devices cannot find or connect to my device. ■ Be sure Bluetooth is turned on. ■ Move closer to the device.
343434-001.book Page 9 Tuesday, September 9, 2003 12:56 PM Troubleshooting Problem Solution Other devices do not receive my correct business card information. ■ Be sure you have correctly set up your business card The iPAQ Pocket PC cannot find my Bluetoothenabled Mobile phone. ■ Be sure your mobile phone is in discoverable mode. ■ Contact your mobile phone manufacturer and ask if User’s Guide information in Bluetooth Settings.
343434-001.book Page 10 Tuesday, September 9, 2003 12:56 PM Troubleshooting Wireless LAN For more information on Wireless LAN, refer to Chapter 9, “Using the Wireless LAN.” Problem I cannot connect to an access point. Solution ■ Be sure the WLAN is on. ■ Be sure the device identified the network you want to connect to. ■ Be sure you provided any necessary authentication keys if prompted by the system. ■ Be sure your iPAQ Pocket PC is within range of the access point.
343434-001.book Page 11 Tuesday, September 9, 2003 12:56 PM Troubleshooting Problem Solution I cannot connect to an available network that shows in the list of networks without a name. It is likely that the network is a “hidden” or non-SSID broadcast network. You must know the network name (SSID) to be able to connect. 1. Tap Start > Settings > Connections tab > Connections > Advanced tab > Network Card. 2. Select Add New Settings. 3. Enter the network name (SSID). 4.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM A Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
343434-001.book Page 2 Tuesday, September 9, 2003 12:56 PM Regulatory Notices Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations.
343434-001.book Page 3 Tuesday, September 9, 2003 12:56 PM Regulatory Notices Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
343434-001.book Page 4 Tuesday, September 9, 2003 12:56 PM Regulatory Notices European Union Notice 0470 Products bearing the CE marking comply with the R&TTE Directive (1999/5/EC), EMC Directive (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. CE compliance of this computer is valid only if powered with an HP-provided CE marked AC Adapter.
343434-001.book Page 5 Tuesday, September 9, 2003 12:56 PM Regulatory Notices For IEEE 802.11b wireless LAN operation of this product, only a limited band is available in France (Channels 10, 11, 12, and 13 only). l'Autorité de régulation des télécommunications (ART) has special regulations for hotspots allowing other channels, too. Please check with ART (http://www.art-telecom.fr) on this for local rulings and for authorization.
343434-001.book Page 6 Tuesday, September 9, 2003 12:56 PM Regulatory Notices Equipment Warning Å WARNING: To reduce the risk of personal injury, electrical shock, fire or damage to the equipment: ■ Plug the AC Adapter into a grounded (earthed) electrical outlet that is easily accessible at all times. ■ Disconnect power from the equipment by unplugging the AC Adapter from the electrical outlet or unplugging the Synchronization cable from the host computer.
343434-001.book Page 7 Tuesday, September 9, 2003 12:56 PM Regulatory Notices U.S. Regulatory Wireless Notice Å WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized.
343434-001.book Page 8 Tuesday, September 9, 2003 12:56 PM Regulatory Notices Japanese Regulatory Wireless Notice Brazilian Regulatory Wireless Notice Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
343434-001.book Page 1 Tuesday, September 9, 2003 12:56 PM B Specifications System Specifications Note: Not all models described are available in all regions. System Feature Description Processor PXA255 400 Mhz RAM (Random Access Memory) h4100 Series: 64 MB SDRAM (55 MB main memory) h4300 Series: 64 MB SDRAM (55 MB main memory) iPAQ File Store (nonvolatile memory) 2.
343434-001.
343434-001.
