User's Guide

Drives
Hardware Guide 4–10
MultiBay Drive Media
This section provides information on using optional optical disc
drives (such as CD-ROM and DVD drives) and optional diskette
drives in the MultiBay.
Inserting an Optical Disc
1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release the
media tray.
3. Pull out the tray 2 until it is fully extended. Position a CD or
one-sided DVD over the tray with the label side up.
4. Gently press the disc 3 onto the tray spindle until the disc
snaps into place. Handle the disc by the edges, not the flat
surfaces. If the media tray is not fully extended, tilt the disc to
position it over the tray spindle, then press it into position.
5. Close the media tray.
✎
After you insert a DVD, a short pause is normal as Autorun opens
the DVD and the WinDVD player if the WinDVD has been
installed. To install WinDVD player, see the “Optical Drive
Software” chapter in the Software Guide on the Documentation
CD. If Autorun is not enabled, see “Displaying Optical Disc
Contents” later in this chapter.
345582-001.book Page 10 Friday, September 12, 2003 2:40 PM