User's Guide

Drives
Hardware Guide 4–14
Resuming From Standby or Hibernation
Ä
CAUTION: To prevent possible video degradation and loss of audio or
video playback functionality, do not initiate Standby or Hibernation
while playing any media.
If Standby or Hibernation is accidentally initiated while a drive
medium (such as a diskette, CD, CD-RW, DVD, or DVD+RW) is
in use, the following results can occur:
■ Your playback might be interrupted.
■ You might see a pop-up warning: “Putting the computer into
Hibernation or Standby may stop the playback. Do you want
to continue?” Select No.
Resume from Hibernation or Standby by pressing the power
button. Audio or video might resume or you might need to restart
the medium.
Inserting a Diskette
To insert a diskette into a diskette drive, gently push the diskette,
label side up, into the drive until it clicks into place.
The media eject button pops out to show that the diskette has been
inserted correctly.
Removing a Diskette
To remove a diskette from a diskette drive:
1. Press the eject button on the drive to eject the diskette.
2. Remove the diskette from the drive.
345582-001.book Page 14 Friday, September 12, 2003 2:40 PM