HP XP7 Fast Snap User Guide (TK913-96003)

Cause of errorRAID Manager commandSSB2
You cannot create the FS pair because you have specified a THP V-VOL in the
initialization process as the FS P-VOL.
paircreate97A4
The command ended abnormally because you specified a volume that was
undergoing online data migration as the FS P-VOL.
All commands97A5
The command ended abnormally because you specified a volume that was
undergoing online data migration as the FS S-VOL.
All commands97A6
You cannot create the pair and use the specified consistency group because
you have you have reached the maximum number of the consistency groups that
can be created.
paircreate97B4
You cannot create the FS pair for the specified P-VOL because the maximum
number of snapshot ID (MU number) was used.
paircreate97B5
You cannot create the FS pair because of one of the following reasons:paircreate97B6
You were in the process of creating a new snapshot group but you reached
the maximum number of snapshot groups that can be created.
You have specified a snapshot group which has reached the maximum number
of pairs allowed in a group.
You cannot create the FS pair because the THP pool is being initialized.paircreate97B7
The command ended abnormally because the status of the pairs using the P-VOL
you specified is suspended (“PSUE” status).
paircreate, pairsplit,
pairresync, pairresync
-restore
97B9
You cannot create the FS pair from the consistency group to which the specified
snapshot group belongs because of one of the following reasons:
paircreate97BF
BC is using the specified consistency group.
You have reached the maximum number of pairs that can be created for a
consistency group.
A pair that uses the same P-VOL exists already in the specified snapshot
group.
The command ended abnormally because you specified an MU number outside
the allowable range.
All commands97C2
The command ended abnormally because of one of the following reasons:All commands97C4
You have specified a pool that is not an FS pool.
You have specified a pool that does not exist.
The command ended abnormally because FS is not installed.paircreate, pairsplit,
pairresync, or pairresync
-restore
97C6
You cannot create the FS pair because the capacity of cache management
devices is insufficient.
paircreate97C7
You cannot create the FS pair because the capacity of the volume you specified
as the P-VOL or the S-VOL of the FS pair is more than the supported size (4TB).
paircreate97C8
The command ended abnormally because you specified a pool that is not an
FS pool.
All commands97CB
You cannot create the FS pair because an FS group is already using the CG
number you specified.
paircreate97CF
The command ended abnormally because you are in the process of turning off
the power.
All commands97D4
You cannot run the command because even though the specified serial number
matches the virtual storage machine, the physical storage system's serial number
All commands97D5
that corresponds with the virtual storage machine's serial number does not match
154 RAID Manager command reference