HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

Cancellation Warning panel
If an error occurs during a creation or update of the configuration file, and you attempt to cancel
the creation or update, the Cancellation Warning panel is displayed and asks if you want to cancel
the creation or update. Note, however, that an unusable configuration file might be created. If an
update fails, the configuration file before the update might be damaged. Therefore, HP recommends
that you remove the cause of the error, and then create or update the configuration file again.
For details about what actions to take when an error occurs during creation or update of the
configuration file, see the HP XP7 for Business Continuity Manager User Guide.
The following figure shows the Cancellation Warning panel.
Cancellation Warning
Command ===>
Warning:
The configuration file was invalid and unusable.
An attempt is being made to cancel the creation or update of
the configuration file. It is recommended to first remove the
cause of the error, then return to the previous screen and
create or update the configuration file again.
Refer to the HELP information for how to resolve the cause of
the error.
Finish creation or update
F1=Help F12=Cancel
When you press the Enter key, the configuration file is not created or updated. If F12=Cancel is
pressed, the panel is displayed, in which you can create or update the configuration file.
Error Code Help panel
Executing the ERRCODE command displays the Error Code Help panel. If you enter an error code
on this panel, you can view the details for that error code.
For details about the ERRCODE command, see “ERRCODE command” (page 13).
In the Exception Message Panel, if you place the cursor on an error code that is within the displayed
message, and then press the F5=ErrCode key, or execute the ERRCODE command, the details for
that error code will be displayed in the Error Code Help Panel. For details on the Exception Message
Panel, see “Exception Message Panel” (page 16).
The following figure shows the Error Code Help panel.
Error Code H Row 1 to 8 of 8
Command ===> Scroll ===> PAGE
Error code . . 6A13
Error details:
The command could not be executed
because a remote command was
executed while the command device
was not defined.
Type of error:
Others.
*********** Bottom of data ************
18 ISPF panels