HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 11 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKM0x) (continued)
Explanation and recommended actionsMessage textMessage ID
For the Cnt Ac-J Z copy group definition, you need to specify a
C/T group ID and a sub C/T group ID.
A Consistency Group ID (C/T
ID,sub C/T ID) is required for
CAJ Copy Group definition.
YKM040E ISPF
For the BC Z/Cnt Ac-S Z/TCA copy group definition, you cannot
specify a sub C/T group ID.
A sub Consistency Group ID
cannot be specified for BC
YKM041E ISPF
Z/CA/TCA Copy Group
definition.
This C/T group ID is already defined. Choose a different ID.This Consistency Group ID
(C/T ID,sub C/T ID) is
YKM042E ISPF
already defined. Choose a
different ID.
For the Cnt Ac-J Z copy group definition, you need to specify a
mirror ID.
A Mirror ID is required for
CAJ Copy Group definition.
YKM043E ISPF
This path set ID is already defined.This Path Set ID is already
defined.
YKM044E ISPF
The physical path is already defined as a logical path.Physical path (priport secport)
is already defined in this
logical path.
YKM045E ISPF
priport
The primary port you specified
secport
The secondary port you specified
The end CU/command control address value is lower than the
start CU/command control address value.
The end CU/CCA value must
not be lower than the start
CU/CCA.
YKM046E ISPF
A storage system cannot be inserted into, or edited in a route
because the storage system has already been scanned via the
specified device address domain ID.
Processing to insert or edit a
storage system was denied
because the storage system
YKM047E ISPF
Correct the specified device address domain ID and serial number
of the storage system.
has already been discovered
by the selected DADID.
Devices cannot be scanned because in the Set Defaults panel, the
remote device address domain ID or Non Gen'ed device address
You cannot perform a device
scan because in the Set
YKM048E ISPF
domain ID has been specified as the local device address domain
ID.
Defaults panel, a remote DAD
ID or Non Gen'ed DAD ID
was specified as the local
DAD ID.
To define a Continuous Access Journal copy group, a path group
ID is required.
A Path ID is required for
Continuous Access Journal
Copy Group definitions.
YKM049E ISPF
The specified copy group attribute value is invalid for this
command.
Invalid Copy Group attribute
name
YKM050E MSG
SC=36 RC=48
(attribute-value)
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
The YKMAKE command with the NOCOPY parameter specified was
executed on an BC Z copy group. This parameter is invalid on
BC Z copy groups.
NOCOPY option invalid for
BC Z Copy Group
YKM056E MSG
SC=36 RC=48
List of messages 73