HP XP7 Business Continuity Manager Installation Guide (TK954-96002)

ManualsBrandsHP ManualsStorageHP XP7 Storage System

Using the YKSETENV command

Execute the YKSETENV command to set the Business Continuity Manager environment variables

(YKLCNSE and YKLCNS2). For details about the format for the YKSETENV command, see

“YKSETENV command format” (page 35).

The following example names the license information dataset HP.BCM.CCENTRAL.LICENSE:

START YKSETENV,PARM='YKLCNSE=HP'

START YKSETENV,PARM='YKLCNS2=BCM'

If YKLCNSE is omitted, the value of the &YKLCNSE system symbol is used. If YKLCNS2 is omitted,

the value of the &YKLCNS2 system symbol is used. The YKLCNS2 value becomes valid when a

value is specified in either YKLCNSE or &YKLCNSE.

NOTE: An IPL will invalidate the Business Continuity Manager environment variables registered

with YKSETENV, that is, they return to the default or the value of the system symbol &YKLCNSE

and &YKLCNS2. HP recommends that you perform either of the following before the next IPL:

• Add the YKSETENV command to the COMMNDxx parmlib member to set the Business Continuity

Manager environment variables again automatically at IPL.

• Define the prefix value in the system symbol &YKLCNSE and &YKLCNS2 of the IEASYMxx

parmlib member, and use this prefix value, which will be registered at the next IPL.

NOTE: The environment variables YKLCNSE and YKLCNS2 are shared by Business Continuity

Manager and Tiered Storage Manager for Mainframe. Exercise caution when setting the

environment variables YKLCNSE and YKLCNS2 in an environment in which Tiered Storage Manager

for Mainframe is installed. For details, see (page 46).

Defining a system symbol in the IEASYM

parmlib member

Define the system symbol YKLCNSE and YKLCNS2for the IEASYMxx parmlib member. After the

definition, enable the setting with an IPL of the host.

The following example names the license information dataset HTC.BCM.CCENTRAL.LICENSE:

SYMDEF(&YKLCNSE='HP')

SYMDEF(&YKLCNS2='BCM')

If &YKLCNSE is omitted, HP is assumed. If &YKLCNS2 is omitted, only &YKLCNSE is used. &YKLCNS2

is valid only when &YKLCNSE has been specified.

NOTE: The system symbols YKLCNSE and YKLCNS2 are shared by Business Continuity Manager

and Tiered Storage Manager for Mainframe. Therefore, you need to be careful when setting the

system symbols YKLCNSE and YKLCNS2 in an environment in which Tiered Storage Manager for

Mainframe is installed. For details, see (page 46).

The following table shows the relationship between the prefix of the license information dataset

name and the specification status for the YKSETENV command or IEASYMxx parmlib member:

Table 19 License information prefix and YKSETENV/IEASYM

status

PrefixIEASYM

parmlib memberYKSETENV command

&YKLCNS2&YKLCNSEYKLCNS2YKLCNSE

YKLCNSE.YKLCNS2YYYY

YKLCNSE.YKLCNS2--YYY

YKLCNSE.YKLCNS2Y--YY

YKLCNSE.&YKLCNS2YY--Y

&YKLCNSE.YKLCNS2YYY--

YKLCNSE.YKLCNS2-----YY

Setting up the environment 41