Hitachi Dynamic Link Manager Software Users Guide for Solaris

Message
ID
Message Text Explanation
aa...aa: Physical-device file path
of the sd or ssd device that
corresponds to the HDLM device
for which the path was deleted
Action
None.
KAPL10734
-W
The boot disk configuration cannot
be changed.
Details
The boot disk configuration
cannot be changed.
Action
Migrate the boot environment
either to an internal disk or to
another LU, and then change the
original boot-disk configuration.
KAPL10735
-E
The primary-path information file
could not be opened. (error
number = aa...aa (bb...bb))
Details
The primary-path information file
could not be opened.
aa...aa: Error number
bb...bb: Character string that
corresponds to that error number
Action
Take action according to the
displayed error number, and then
retry the operation.
KAPL10736
-I
The dlmsetconf utility aborted
processing because the user
pressed Ctrl+C.
Details
The dlmsetconf utility aborted
processing because the user
pressed Ctrl+C.
Action
Re-execute dlmsetconf.
KAPL10737
-W
Configuration changes by adding a
path dynamically and deleting all
existing paths cannot be performed
concurrently on the same LU (LDEV
= aa...aa).
Details
Configuration changes by adding
a path dynamically and deleting
all existing paths cannot be
performed concurrently on the
same LU (LDEV = aa...aa).
aa...aa: LDEV name
Action
Operate the path deletion after
adding the path.
KAPL10751
-I
The dlmsetboot utility started.
Start time = aa...aa
Details
The dlmsetboot utility started.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
8-114
Messages
Hitachi Dynamic Link Manager (for Solaris) User Guide