Hitachi Dynamic Link Manager Software Users Guide for Solaris

Message
ID
Message Text Explanation
message confirming execution of
the dlmvxexclude utility for
assisting creation of the VxVM
configuration file.
Action
Retry dlmvxexclude command.
For details on the dlmvxexclude
utility, see The dlmvxexclude
Utility for Assisting Creation of the
VxVM Configuration File on page
7-31.
KAPL10722
-I
The user terminated the operation. Details
The execution of the
dlmvxexclude utility for assisting
creation of the VxVM configuration
file was stopped.
Action
None. For details on the
dlmvxexclude utility, see The
dlmvxexclude Utility for Assisting
Creation of the VxVM
Configuration File on page 7-31.
KAPL10723
-I
The execution of dlmvxexclude is
not required for the configuration.
Details
The devices from VxVM do not
need to be disabled so the
dlmvxexclude utility does not
need not be executed.
Action
It is not necessary to execute this
utility. For details on the
dlmvxexclude utility, see The
dlmvxexclude Utility for Assisting
Creation of the VxVM
Configuration File on page 7-31.
KAPL10732
-W
The system configuration is invalid.
(filter path = aa...aa)
Details
The system configuration is
invalid.
aa...aa: Filter path
Action
In the current system
configuration, the same HDLM
logical device has been created in
more than one LU. Reconfigure
the system, and then run the
dlmsetconf utility.
KAPL10733
-I
A path was deleted successfully.
(filter path = aa...aa)
Details
A path was deleted successfully.
Messages
8-113
Hitachi Dynamic Link Manager (for Solaris) User Guide