Hitachi Dynamic Link Manager Software Users Guide for Solaris

Types of Collected Logs
HDLM collects information on detected errors and trace information in the
integrated trace file, trace file, error logs, log for the dlmcfgmgr utility for
managing the HDLM configuration, and syslog. You can use the error
information to examine the status of an error and analyze the cause of the
error.
The following table lists and describes the error information that can be
collected in logs.
Table 2-6 Types of Error Information
Log name Description Output destination
Integrated trace file Operation logs for the HDLM
command is collected.
The default file path
is /var/opt/hitachi/
HNTRLib2/spool/
hntr2[1-16].log.
To specify the output
destination directory and
the file prefix for the
integrated trace file, use a
Hitachi Network Objectplaza
Trace Library (HNTRLib2)
utility.
Trace file Trace information on the HDLM
manager is collected at the level
specified by the user. If an error
occurs, you might need to change
the settings to collect trace
information.
The trace file name
is /var/opt/
DynamicLinkManager/log/
hdlmtr[1-64].log
Error log Error information is collected for the
user-defined level. By default,
HDLM collects all error information.
HDLM Manager logs:
/var/opt/
DynamicLinkManager/l
og/dlmmgr[1-16].log
Hitachi Command Suite
Common Agent Component
logs:
/var/opt/
DynamicLinkManager/l
og/dlmwebagent[1-
n].log
The value n depends on
the setting in the file
dlmwebagent.properti
es.
log for the
dlmcfgmgr utility
Logs are collected when the
dlmcfgmgr utility is executed.
The log file name
is /var/opt/
DynamicLinkManager/log/
dlmcfgmgr1[1-2].log
Syslog The HDLM messages on and above
the level set by the user with the
The default file path
is /var/adm/messages.
HDLM Functions
2-31
Hitachi Dynamic Link Manager (for Solaris) User Guide