Hitachi Dynamic Link Manager Software Users Guide for Solaris

Message
ID
Message Text Explanation
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for the host,
storage, and LUs. For details on
the view operation, see view
(Displays Information) on page
6-34.
KAPL01158
-E
Dynamic I/O path control cannot be
applied to the specified storage.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the path ID. For details on
the view operation, see
view
(Displays Information) on page
6-34.
KAPL01159
-I
Paths were added. (number of
paths added = aa...aa, completion
time = bb...bb)
Details
This message indicates that an
add operation succeeded.
aa...aa: number of paths added
bb...bb: year (4 digits)/month/
date hour:minute:second
Action
Use the view operation of the
HDLM command (dlnkmgr) to
verify information about the
added paths.
KAPL01160
-W
The path configuration was not
changed.
Details
This message indicates that no
paths were added.
Action
¢
Execute an OS command,
and check whether the
addition of paths is
recognized by the OS.
¢
Use the view operation of the
HDLM command (dlnkmgr) to
check whether the paths
have already been added to
HDLM.
KAPL01161
-I
This operation will change the path
configuration. Do you want to
continue? [y/n]:
Details
This message confirms whether
to perform a path configuration
change by using an add
operation.
Action
Enter y to change the path
configuration, or enter n to cancel
the operation.
Messages
8-27
Hitachi Dynamic Link Manager (for Solaris) User Guide