Hitachi Dynamic Link Manager Software Users Guide for Solaris

Message
ID
Message Text Explanation
Terminate unnecessary
applications to increase the
amount of free memory, and then
retry.
KAPL01023
-W
The last Online path for the device
cannot be placed Offline(C).
Details
The path specified for the
offline operation cannot be set
to Offline(C) because it is the
last, available path to the LU from
the host.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the status of the paths. For
details on the view operation, see
view (Displays Information) on
page 6-34.
KAPL01024
-W
The specified parameters cannot be
specified at the same time.
Operation name = aa...aa,
parameters = bb...bb
Details
aa...aa: Specified operation name
bb...bb: Parameters that cannot
be specified at the same time
Action
Execute help operation of the
HDLM command (dlnkmgr) to
check which parameters can be
specified at the same time, and
then retry. For details on the
help operation, see
help
(Displays the Operation Format)
on page 6-4.
KAPL01036
-E
The Offline path cannot be placed
online. PathID = aa...aa
Details
aa...aa: Path ID (decimal
(base-10) number)
Action
Remove the error in the path,
and then retry.
KAPL01039
-W
During the online operation
processing of the HDLM command,
a path that cannot be placed in the
Online status was detected. PathID
= aa...aa Would you like to
continue the processing of the
online operation? [y/n]:
Details
A path that cannot be placed
Online was detected during
multipath online processing.
To ignore this path and perform
online processing for the next
path, enter y.
To cancel processing, enter n.
aa...aa: Path ID (decimal
(base-10) number)
Action
Messages
8-9
Hitachi Dynamic Link Manager (for Solaris) User Guide