Hitachi Dynamic Link Manager Software Users Guide for Solaris

#5
The checking interval can be set regardless of whether the dynamic I/O
path control function is enabled or disabled.
The following is an example of an installation-information settings file:
[INSTALLATION_SETTINGS]
installfile_location=/cdrom/cdrom0
logdir=/var/tmp
licensekeyfile=/var/tmp/hdlm_license
driver_config=y
restart=n
device_config=n
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
load_balance_same_path_use_times=1
lbex_usetimes_limit=100
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1
intermittent_error_monitor=on
intermittent_error_monitor_interval=30
intermittent_error_monitor_number=3
dynamic_io_path_control=off
dynamic_io_path_control_interval=10
About the Log File
During an unattended installation, information about installation progress is
output to the log file installhdlm.log.
The following describes the installhdlm.log file:
• The installhdlm.log file is created in the directory specified by the
logdir key in the installation-information settings file. Note that the
directory must not be shared with hosts on which unattended installation
is performed. If the logdir key does not have a value, the file is created
in the /var/tmp directory.
• If the installhdlm.log file already exists, log data is appended to the
file.
Notes:
The installhdlm.log file is not deleted when HDLM is removed. If the file is
no longer necessary, delete it manually.
7-42
Utility Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide