Hitachi Dynamic Link Manager Software Users Guide for Solaris

displayed. The sorting key is iLU and its configuration information is
displayed for each LU.
For details on the content of each displayed item, see Table 6-18
Displayed LU Information on page 6-64.
The following shows the sub-parameters:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see
Table
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-32 in
Parameters on page 6-18.
-hdev host-device-name|-pathid AutoPATH_ID
Filters the information only for the LUs corresponding to the specified
host device, if the -hdev parameter is specified.
Specify the name of the logical device file (minus the slice number, in
cUtXdY format) for the HDLM device to indicate the desired host
device.
If the -pathid parameter is specified, only information about the LU
connected to the path with the specified AutoPATH_ID is displayed.
-t
Omits the title for each information item.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product : 9500V
SerialNumber : 0051
LUs : 3
iLU HDevName Device PathID Status
0001 c6t2d0 sd61 000003 Online
sd64 000009 Online
0002 c6t2d1 sd62 000004 Online
sd65 000010 Online
0003 c6t2d2 sd63 000005 Online
sd66 000011 Online
Product : 9970/9980
SerialNumber : 15001
LUs : 3
iLU HDevName Device PathID Status
0670 c6t5d0 sd74 000000 Online
sd80 000006 Offline(E)
6-58
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide