Hitachi Dynamic Link Manager Software Users Guide for Solaris

-category [[ss] [a] [ca]|all]
Specifies the categories of audit log data to be collected. The table
below lists and describes the values used for this setting. The default
is all. If you specify the -category parameter without specifying a
value, all is assumed.
Table 6-8 Values Indicating Audit Log Data Categories
Value Explanation
ss
Audit log events of the StartStop category are collected.
a
Audit log events of the Authentication category are collected.
ca
Audit log events of the ConfigurationAccess category are
collected.
all
Audit log events of the StartStop, Authentication, and
ConfigurationAccess categories are collected.
-audfac facility-value
Specifies the audit log facility.
The table below lists the values used for this setting. The default is user.
Table 6-9 Values of the Audit Log Facility
Value Corresponding facility value in the /etc/syslog.conf file
user or 1
user
local0 or 16
local0
local1 or 17
local1
local2 or 18
local2
local3 or 19
local3
local4 or 20
local4
local5 or 21
local5
local6 or 22
local6
local7 or 23
local7
-lbpathusetimes number-of-path-use-times
Specifies the number of times the same path can be used for I/O
operations when the Round Robin (rr), Least I/Os (lio), or Least Blocks
(lbk) algorithm is used for load balancing.
You can specify a decimal (base 10) value from 0 to 999999. The default
is 1.
If you specify 0, operation is the same as when load balancing is disabled.
-expathusetimes number-of-path-use-times
6-30
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide