Hitachi Dynamic Link Manager Software Users Guide for Solaris

Figure 3-20 Booting from the post-migration environment
11. When the host starts, confirm that the swap device and dump device
have been correctly configured. Then, use the mount command to confirm
that / (root) and /usr have been correctly configured.
# swap -l
swapfile dev swaplo blocks free
/dev/md/dsk/d20 85,20 16 8409584 8409584
# dumpadm
Dump content: kernel pages
Dump device: /dev/md/dsk/d20 (swap)
Savecore directory: /var/crash/host
Savecore enabled: yes
# mount
/ on /dev/md/dsk/d10 read/write/setuid/devices/intr/largefiles/
logging/xattr/onerror=panic/dev=1540064 on Mon Mar 9 11:00:25
2009
/usr on /dev/md/dsk/d30 read/write/setuid/devices/intr/
largefiles/logging/xattr/onerror=panic/dev=154012c on Mon Mar 9
11:00:25 2009
12. Set up a two-mirror configuration of / (root), swap, and /usr.
# metainit -f d12 1 1 c6t50060E08000436D1d7s0
# metattach d10 d12
Creating an HDLM Environment
3-137
Hitachi Dynamic Link Manager (for Solaris) User Guide