HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-01 Release Notes

1. Stop the Device Manager agent service and automatic execution of the HiScan command on
the host.
2. Check whether the target host is registered in any resource groups.
3. Change the target host name.
4. From the Device Manager GUI or CLI, change the host name to a completely different name.
Example:
Before: ABCD
After: EFGH
5. Start the Device Manager agent service and automatic execution of the HiScan command on
the host.
6. From the Device Manager GUI or CLI, delete the host name in the Device Manager server.
7. If the target host had been registered in any resource groups (as described in step 2), register the
host again.
8. Refresh the storage systems to which the LUNs recognized by the target host belong.
The parity group list dialog box
The parity group number might not be displayed correctly.
In this case, please refer to the parity group summary information to confirm the correct number.
In addition, the format type cannot be chosen when the create volume dialog is opened from the parity
group list.
Open the dialog from another screen.
Capacity specification for virtualizing a volume
In the Virtualize Volumes dialog box or the CLI AddExternalArrayGroup command, when
virtualizing a volume, specifying a capacity that is greater than 4.0 TB for a volume and XP P9500
for internal storage system, the virtualization of the volume generates the following message.
Virtualize Volumes dialog box
An error occurred during processing on the storage system. (error code 1
= "605", error code 2 = "66744", meaning = "It is not set within the range
where LDEV capacity can be used.") If the configuration was being changed,
refresh both the storage system and external storage system. If you are
a local user, contact the system administrator.
(KAIC06450-E)
AddExternalArrayGroup command of Device Manager CLI
KAIC90083-E Device Manager Exception:
error code=6450
error level=2
error source=StorageManager.AddExternalArrayGroup
description=An error occurred during processing on the storage system.
(error code 1 = "605", error code 2 = "66744", meaning = "It is not set
within the range where LDEV capacity can be used.") If the configuration
was being changed, refresh both the storage system and external storage
system. If you are a local user, contact the system administrator.
(KAIC90083-E)
Important considerations 25