HP StorageWorks XP24000/XP20000 LUN Manager User Guide (T5214-96092, May 2011)

DescriptionItem
The WWN list is available when you select an item related
to a Fibre Channel port from the tree. For details, see “The
WWN List” (page 16).
WWN list
This table provides information about the logical volumes
in the storage system. For details, see “LDEV List”
(page 17).
LDEV list
Other components in this window are explained in later sections.
LU Path Tree
Use this tree to find information about LU paths. When you select a host group from this tree, the
table on the right displays information about LU paths associated with the selected host group.
If you double-click the Fibre folder, Fibre Channel ports in the storage system appear as icons. On
the right side of each icon is the port name, the port address, LUN security status, and the port
attribute (that is, whether the port is an initiator port, a target port, an RCU target port, or an
external port).
The Fibre folder does not display if the storage system does not contain a Fibre Channel adapter.
Figure 5 Fibre Folder
The following are Fibre Channel port icons:
DescriptionIcon
Indicates a port in Standard mode. LUN security is disabled on the port.
Indicates a port in Standard mode. LUN security is enabled on the port.
Indicates a port in High Speed mode. LUN security is disabled on the port.
Indicates a port in High Speed mode. LUN security is enabled on the port.
Indicates a port in Initiator/External MIX mode. LUN security is disabled on the port.
Indicates a port in Initiator/External MIX mode. LUN security is enabled on the port.
When you double-click a Fibre Channel port in the tree, a list of host groups ( ) appears. On the
right of this icon is the host group number (G-ID), the host group name, and the host mode. For
details on host modes, see “Host Modes for Host Groups” (page 34).
When you double-click a host group in the tree, a list of host bus adapters ( ) appears. On the
right of this icon is the nickname and the WWN of the host bus adapter. Host bus adapters are
adapters contained in host computers and are used as ports for connecting hosts and the storage
system.
14 Using the LUN Manager GUI