HP StorageWorks P9000 Replication Manager Software 7.1.1 Configuration Guide (TB584-96029, September 2011)

NOTE:
The default values in the logger.properties file assume 6,000 pairs in an open system and
40,000 pairs in a mainframe system.
Table 39 Memory size and amount of output log information
Amount of log data to be retained (MB)
Memory heap
size
Transmission logs
Database log
Trace
log
Pair status up-
date log
User opera-
tions log
Configuration
update log
205050120120Small
305070170130Medium
3050100230140Large
serverstorageif.properties
The serverstorageif.properties file is used to specify the values of properties related to the
interface between Replication Manager and Device Manager server. The following table describes
the available properties and settings.
Table 40 List of properties in the serverstorageif.properties file
DescriptionProperty
The amount of time Replication Manager waits to read data from Device
Manager server. If 0 is specified, Replication Manager waits until all data is
read without timing out.
Specifiable values: 0 to 86400 (seconds)
Default value: 3600
ssif.socketTimeout
The amount of time Replication Manager waits to connect to Device Manager
server. If 0 is specified, Replication Manager waits until a connection is
established without timing out.
Specifiable values: 0 to 3600 (seconds)
Default value: 5
ssif.socketConnect-
Timeout
The amount of time Replication Manager waits to issue an alert message query
to Device Manager server.
Specifiable values: 1 to 3600 (seconds)
Default value: 1800
Note: When you change this value, do not specify a value greater than the
value specified for ssif.socketTimeout (except zero). If you specify a
greater value, alerts might not be received immediately.
ssif.alertTimeout
Configuration Guide 83