HP StorageWorks P9000 Replication Manager Software 7.1.1 Configuration Guide (TB584-96029, September 2011)

2. Check the execution results.
Make sure that the host name obtained by this command and the name of the host (pair
management server) on which Device Manager Agent is installed are the same.
An example of the command execution results is shown below. The value shown for name is the
host name. In this example, you can see that the host cci-vm-r has been registered.
RESPONSE:
An instance of Host
objectID=HOST.8
name=cci-vm-r
ipAddress=10.208.176.103
capacityInKB=42,991,616
hostType=-1
List of 1 WWN elements:
An instance of WWN
WWN=50.00.08.70.00.30.55.04
3. If you cannot identify the pair management server name by using this command, execute the
hdvmagt_account command on the pair management server in order to re-associate the Device
Manage server and Device Manager Agent.
For details about how to execute the hdvmagt_account command, see the HP StorageWorks
P9000 Command View Advanced Edition Software Device Manager Agent Administrator Guide.
Recognizing the command device
This appendix describes how to make sure that Device Manager server recognizes the command
device that is assigned to the host (pair management server).
To make sure that Device Manager server recognizes the command device:
1. Execute the GetHostInfo command:
GetHostInfo
2. Check the return value for lastUpdated.
If a value has already been registered, the command device is recognized correctly.
An example of the command execution results is shown below. In this example, 1217593922
has been registered to lastUpdated.
RESPONSE:
An instance of HostInfo
objectID=HOSTINFO.cci-vm-r.10000.1.0
name=cci-vm-r
serialNumber=83000101
arrayType=D800S
ipAddress=10.208.176.103
mountPoint=
:
percentUsed=-1
lastUpdated=1217593922
Checking the pair management server information managed by Device Manager server (for the Core
CLI License)
138