HP StorageWorks P9000 Replication Manager Software 7.1 Release Notes (TB584-96025, May 2011)

7
This issue occurs when all of the following conditions are met:
 A configuration where group information is imported to RAID Manager.
 The definitions of HORCM_DEV, HORCM_LDEV, and HORCM_LDEV are omitted in the
RAID Manager configuration definition file.
 Either of the following operations is performed:
 One of the following Replication Manager GUI operations is performed:
 Creating a replica for Exchange.
 Concealing a secondary volume.
 Unmounting a replica.
 Either of the following Application Agent CLI operations are performed:
 One of the following commands for VSS backup is executed:
The drmexgbackup command (with -mode vss option)
The drmfsbackup command (with -mode vss option)
The EX_DRM_EXG_BACKUP command (with -mode vss option)
The EX_DRM_FS_BACKUP command (with -mode vss option)
 One of the following commands for concealing the secondary volume is
executed:
The drmdevctl command (with -detach option)
The drmumount command
The EX_DRM_UMOUNT command
The EX_DRM_CACHE_PURGE command
The EX_DRM_TAPE_BACKUP command
[Recovery Procedures]
The procedures for recovering the changes performed by RAID Manager commands
executed by Application Agent internally are described as follows.
On the database server (file server), repeat the following procedures for all of the pair
volumes that are targets of Application Agent processing:
1. Confirm whether the primary volume does not allow INQUIRY.
PROMPT>raidvchkdsp –g Grp01 –d vol01 -v gflag
Group PairVol Device_File Seq# LDEV# GI-C-R-W-S PI-C-R-W-S R-Time
Grp01 vol01 Harddisk1 2332 3 D E E E E E E E E E –
Proceed to step 2 only if the value of the GI attribute is D (= INQUIRY is not allowed).
2. Release the INQUIRY of the primary volume.
PROMPT>raidvchkset –g Grp01 –d vol01 -idb
3. Confirm that the primary volume allows INQUIRY.
PROMPT>raidvchkdsp –g –g Grp01 –d vol01 -v gflag