HP P9000 Replication Manager Software 7.4.1-00 Configuration Guide (TB584-96064, March 2013)

SQL Server 2008
SQL Server 2008 R2
SQL Server 2012
6. Only SQL Server 2012 is supported.
7. A cluster configuration on a guest OS is not supported.
Table 41 Windows Server Hyper-V support based on the guest OS connection method
SupportedGuest OSHost OSGuest OS connection methodPhysical connection
YRAIDRAID (offline)Pass through
Fibre Channel
NNon-RAIDRAIDVariable/Fixed
VHD/VHDX
NNon-RAIDRAIDRegistered as a CSV
NRAID--Direct connection
YRAIDRAID (offline)Pass through
iSCSI
NNon-RAIDRAIDVariable/Fixed
VHD/VHDX
NNon-RAIDRAIDRegiastered as a CSV
YRAID--Direct connection
NOTE:
The following restrictions apply:
• SQL Server cluster configurations are not supported on guest operating systems, except for a
limited subset of configurations between guest operating systems, which are supported only in
Replication Manager version 7.1 and later. However, note that in these configurations, you must
use disks that are directly connected to iSCSI, and the SQL version must be one of the following:
SQL Server 2005, SQL Server 2008, SQL Server 2008 R2, and SQL Server 2012.
• The backup server cannot support a Windows Server Hyper-V environment if a pass-through
connection is used and the secondary volume is recognized dynamically (hidden). Backup using
VSS is not supported if a pass-through connection is used.
Hyper-V Live Migration
In addition to the notes provided in the Application Agent CLI and Windows Server 2008 Hyper-V
documentation, please note the following points when using the Application Agent CLI under a guest
OS intended for live migration:
• Use a configuration where the command device is not connected directly to the database server;
be sure to use a virtual command device. For details about how to set up a virtual command
device, see the P9000 RAID Manager documentation.
While it is possible to use a configuration where the command device is connected directly to the
database server, you must perform operations on the host OS to disconnect the command device's
drive from the guest OS prior to live migration and reconnect it after completion. For details about
these disconnection and connection operations, see the Microsoft documentation related to Win-
dows Server 2008 Hyper-V.
Setting up Application Agent76