6.3 HP IBRIX X9720/StoreAll 9730 Storage Administrator Guide (AW549-96073, June 2013)

1. Log in to the server.
• 9730 systems. The welcome screen for the installation wizards appears, and the setup
wizard then verifies the firmware on the system and notifies you if a firmware update is
needed. (The installation/configuration times noted throughout the wizard are for a new
installation. Replacing a node requires less time.)
IMPORTANT: HP recommends that you update the firmware before continuing with the
installation. 9730 systems have been tested with specific firmware recipes. Continuing
the installation without upgrading to a supported firmware recipe can result in a defective
system.
• X9720 systems. Manual configuration is required on the X9720 to recover the bond1
cluster network. Click Cancel to leave the System Deployment Menu and follow the steps
in “Manually recovering bond1 as the cluster” (page 165).
2. The wizard scans the network for existing clusters. On the Join Cluster dialog box, select the
management console (Fusion Manager) for your cluster.
156 Recovering the X9720/9730 Storage