6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

6. If you changed the hostname, select Reject, and the following screen appears. (The screen
also appears if your cluster was not found in step 3.) Select Enter FM IP.
The wizard asks for information about the server you are using. On the System Date and Time
dialog box, enter the system date (day/month/year) and time (in 24-hour format). Tab to the
Time Zone field and press Enter to display a list of time zones. Select your time zone from the
list.
The Server Networking Configuration dialog box defines the server on bond0. Note the
following:
• The hostname can include alphanumeric characters and the hyphen (–) special character.
It is a best practice to use only lowercase characters in hostnames; uppercase characters
can cause issues with IBRIX software. Do not use an underscore (_) in the hostname.
• The IP address is the address of the server on bond0.
• The default gateway provides a route between networks. If your default gateway is on a
different subnet than bond0, skip this field.
• VLAN capabilities provide hardware support for running multiple logical networks over
the same physical networking hardware. IBRIX supports the ability to associate a VLAN
134 Expanding an X9320 cluster with an X9320 starter kit