5.6.2 HP IBRIX X9000 Release Notes

To enter more than one SNMP Manager IP, add the following lines in the snmp.conf file:
rwcommunity public <Manager IP>
rocommunity public <Manager IP>
trapsink <Manager IP> public
For <Manager IP>, enter CMS/IRSS or any other SNMP manager IP.
After updating the snmp.conf file, restart the snmpd service:
# service snmpd restart
For more information about the /sbin/hpsnmpconfig script, see “SNMP Configuration” in the
hp-snmp-agents(4) man page. For information about the HP System Management Homepage,
see:
http://h18013.www1.hp.com/products/servers/management/agents/index.html
IMPORTANT: The /opt/hp/hp-snmp-agents/cma.conf file controls certain actions of the
SNMP agents. You can add a trapIf entry to the file to configure the IP address used by the SNMP
daemon when sending traps. For example, to send traps using the IP address of the eth1 interface,
add the following:
trapIf eth1
Then restart the HP SNMP agents:
service hp-snmp-agents restart
For more information about the cma.conf file, see Section 3.1 of the Managing ProLiant servers with
Linux HOWTO at Managing ProLiant servers with Linux HOWTO .
Start or restart Insight Remote Support services
Start or restart the following services:
• System Management Homepage:
# service hpsmhd restart
• SNMP Agent:
# service snmpd restart
• HP SNMP Agents:
# service hp-snmp-agents start
To ensure that hp-snmp-agents restarts when the system is rebooted, enter the following command:
# chkconfig hp-snmp-agents on
Discover nodes on HP SIM or IRSS
For X9000 systems, HP Systems Insight Manager (SIM) uses the SNMP protocol to discover and identify
systems automatically. If desired, you can configure HP SIM to discover system-specific network
segments, a targeted host, or IP address ranges. For IRSS, see the HP Insight Remote Support Standard
A.05.50 Hosting Device Configuration Guide for more information. (Use the link in the “Prerequisites”
section to locate this guide.) For HP SIM, see the HP System Insight Manager 6.x User Guide at: http://
bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02537452/c02537452.pdf
Configure Entitlements
Configure the CMS/IRSS software to enable remote support for X9000 systems.
Configuring HP Insight Remote Support 9