HP VMA-series Memory Array Installation and Service Guide

Chapter 5 - Operating the System via the CLI
92 VMA-series Memory Array Installation and Service Guide HP-AM456-9002A Rev 01
Displaying and Setting Hardware Information
Display hardware information for the Memory Array, including:
• Fan tray status
• Which slots are populated with VIMMs
• Individual VIMM information
•Test slots
•System LEDs
Displaying VIMM Configuration Information
Display the VIMM configuration information at the Slot context level.
To display the VIMM configuration information:
1. Log into the Memory Array.
2. Navigate to the desired Slot context level. At the root prompt, type:
Where:
3. At the context prompt, type:
This command displays text similar to the following:
context chassis board 0 slot <n>
n Specifies the VIMM slot number to move to. Valid values are in
the range of 0–83, inclusive.
show vimm
chassis board 0 slot 56> show vimm
admin-state up
oper-state up
vimm-state active
raid-group 0
vimm-type FLASH
mem-type SLC-NAND
raw-capacity 68.7GB (64GiB)
raw-capacity-bytes 68,719,476,736
fmt-capacity 45.1GB (42GiB)
fmt-capacity-bytes 45,097,156,608
part-number 1000159A-B-P4
serial-number 18094R00000003
mfg-date 20090422
fw-date Thu Feb 11 17:54:00 2010
fw-version 0x39df